06-06-2016, 10:32 PM
(06-06-2016, 08:54 PM)Joeflyer Wrote: Red, I can try to make the same flight to see if I get the same issue with the origin. How many times have you made the KMRY to KWVI flight? Also, have you attempted KWVI to KMSY and get the same result? Also, do you have any addon scenery for KMSY?
Regarding the A2A aircraft, that's a tough one since you are having to use the aircraft's own "failure/repair" system and FsP that may induce a failure at any time. Seems to me there could be some conflicts that would creep in from time to time. Has anyone on the A2A forums made any suggestions about this?
Regarding Sam: He is not a moderator but does try very hard to help in any way he can. I appreciate anyone who can help others with the various issues on here. There are several more moderators but they have not been around the forum in quite some time.
I'll also try to repeat the same flight or its way back, and I'll post again then. The only other flight I did so far was from EGHI to EGKK, same results despite no actual issue during the flight.
I do have an add-on for KMRY from OrbX, as well as North California

I already addressed the A2A's specific system above, I'm sure there was no failure on that side. The problem is, if there is no information on the "failure" detected by FSP so we'll never know for sure where the false positive is coming from.
My earlier question on the support was just to know how this was organized regarding that product, whether the developer and/or support were reading this or just the users helping one another.
Thanks to the both of you for your replies!