Crash to Desktop after flight

[MobilePCPilot]

This has happened to me twice.

After a FSP flight and turning off the runway, MS ATC transfers me over to ground. Right after "I" say going to ground, FS crashes to the desktop.

This is a little dishearting after a long flight.

I rebuilt my whole FS folder at the beginning of Nov (daughter was sick at home). I'm running FS2004 ver 9.1, FSP ver Sept 5, 2005, Active Sky V-enhanced
(current), Flight Environment ver 1.0.2, Reality XP430 service module ver 5.2.1.0, FSUIPC ver 3.5, Carenado U206G

Any ideas why FS is crashing?

TIA

-Todd Giencke

[SaVas]

Todd,

when it crashes does it give you any Win XP error message as to if its a .dll issue?

I dont see anything that would possibly cause it as I have all you have except the Carenado aircraft, the 430 serivice module, and I use a slightly older version of
FSUIPC (registered)

My suggestions:

Try out of different airports on a different continent
Try different aircraft



Post Edited ( 12-07-05 19:28 )

[SWAFO]

That's better than crashing mid flight! If it's a bothersome issue, and it's not generating any error messages, a re-installation is always
best when these types of things happen.

[svenpurple7]

Todd, I had the same problem you have now. The Carnado aircraft gave me problems sometimes. Sometimes they didn't. It was
puzzling and fustrating.
Are your flights started from a "saved" flight? If so, you may want to start your flights from the "create a flight" screen and see if you get a
CTD when being handed from tower to ground. That solved my problem.

Good luck,
Ben.

[SaVas]

Word to the wise: Never start from a saved flight. The saved flight feature in FS9 is the buggiest part of simming. Its like eating at the
$2.00 all you can eat greasy spoon where bugs run a plenty

[red_baron]

i had same problem. what is your graphic card model ? u use a lot add on so your graphic card has to run hard update your graphic
card drivers ,
or rebuilt fs9 if not
or rebuilt your windows if not
or last choice update your BIOS ( be careful this choice is Advance level user)

[eazy]

red_baron wrote:
update your graphic card drivers ,
or rebuilt fs9 if not
or rebuilt your windows if not

... or rebuild your life if not

Just a guess: Todd, do you happen to use EditVoicePack?

[MobilePCPilot]

Thanks guys for all of the feed back.

Now bear with me...

Savas- No, no messages from windows XP. And I don't think it is the XP430. I use that too offen with other aircraft.

Brad- I hope I don't have to do a reinstall. because I just did that last month. But I also did a major defrag sence then...

Svenpurple7- I think you have found the problem. I think I need to do a clean start when I start up a flight. At least with Corando aircraft (I still love the 206).

Eazy- No I don't use EditVoicePack.

I'll keep you posted if this happends again. But I just made C4 and have bought a Pilatus PC-12. Not bad for starting at C0 with $500k! I do think aeroSOFT's
DHC2 Beaver and Corando's Cessna U206G are the best money makers for the C0-C3 pilot. I only fly the 206 when I need an autopilot. My plan is to have a fleet
of heavy lifting single engine aircraft. Why pay the price to feed another engine(s)?

Now does anyone make a single turbofan cargo hauler...

Thanks again...

Todd Giencke

[svenpurple7]

I am glad it is working for you Todd. However, I will not take credit for finding the problem. It is a well known issue that "saved" flights
are very buggy. The all powerful search feature will verify that.
Now go out there as carry some pax! 8)8)

Enjoy,
Ben.

[lightrail]

I read somewhere that aerosoft installs a dll file into the module folder and this causes the crash. It seems you don't need the dll for the
program - it's probably something to do with web access. I deleted an aerosoft dll from my computer and it solved one of my CTDs.