14-09-2005, 03:22 AM
2-add effect to your wav (bell tone, door etc etc)
Copilot sound (prefix "cpl_") don't need usually a bell tone or anything like that
but crew sound (prefix "crew_" ) may need them if they are announcements to passengers.
You can use the sound below wich contain the bell tone in 22050 16 bits mono
to copy/past at the start of each announcement sound.
Bell sound: http://www.fspassengers.com/images/wav_tutochim.wav (right click save as)
If you intend to do the "cruise_" sound with the door that open and the background noise below is a wav
that contain both effect, this said it can be a hard job to get a really good effect consider using
simply plain voice without effects if you don't know very well sound editing.
Anyway here is the sound that contain door and background noise effect:
http://www.fspassengers.com/images/wav_tutodoorback.wav (right click save as)
Dan
Post Edited ( 09-15-05 16:44 )
Copilot sound (prefix "cpl_") don't need usually a bell tone or anything like that
but crew sound (prefix "crew_" ) may need them if they are announcements to passengers.
You can use the sound below wich contain the bell tone in 22050 16 bits mono
to copy/past at the start of each announcement sound.
Bell sound: http://www.fspassengers.com/images/wav_tutochim.wav (right click save as)
If you intend to do the "cruise_" sound with the door that open and the background noise below is a wav
that contain both effect, this said it can be a hard job to get a really good effect consider using
simply plain voice without effects if you don't know very well sound editing.
Anyway here is the sound that contain door and background noise effect:
http://www.fspassengers.com/images/wav_tutodoorback.wav (right click save as)
Dan
Post Edited ( 09-15-05 16:44 )