15-07-2005, 10:18 PM
Hi,
Just as an example, the Weight a& Balance section of my DC85 is:
[weight_and_balance]
// Total Weight : 310,600 pounds (140,885.05 kilos)
// Fuel Weight : 120600 pounds
// Zero Fuel Weight: 190,000 pounds (86,182.10 kilos)
// Payload Weight : 51,734 pounds (23,466.03 kilos)
// Baggage Hold Wt : 8,448 pounds (3,831.93 kilos)
// Food/Equip Wt : 705.00 pounds (319.78 kilos)
empty_weight=138266
max_gross_weight=325000
station_load.0= 645.00, 49.00, 0, 0.00 // COCKPIT: Flight Crew and their stuff
station_load.1= 362.00, 44.00, 0, 0.00 // Fore (2) Attendant(s)
station_load.2= 362.00, -56.00, 0, 0.00 // Aft (2) Attendant(s)
station_load.3= 87.00, 44.00, 0, 0.00 // Galley
station_load.4= 680.00, 39.00, 0, 0.00 // First Class (4 people)
station_load.5= 680.00, 34.00, 0, 0.00 // First Class (4 people)
station_load.6= 680.00, 29.00, 0, 0.00 // First Class (4 people)
station_load.7= 1020.00, 24.00, 0, 0.00 // Economy Class (6 people)
station_load.8= 1020.00, 20.00, 0, 0.00 // Economy Class (6 people)
station_load.9= 1020.00, 16.00, 0, 0.00 // Economy Class (6 people)
station_load.10=1020.00, 12.00, 0, 0.00 // Economy Class (6 people)
station_load.11=1020.00, 8.00, 0, 0.00 // Economy Class (6 people)
station_load.12=1020.00, 4.00, 0, 0.00 // Economy Class (6 people)
station_load.13=1020.00, 0.00, 0, 0.00 // Economy Class (6 people)
station_load.14=1020.00, -4.00, 0, 0.00 // Economy Class (6 people)
station_load.15=1020.00, -8.00, 0, 0.00 // Economy Class (6 people)
station_load.16=1020.00, -12.00, 0, 0.00 // Economy Class (6 people)
station_load.17=1020.00, -16.00, 0, 0.00 // Economy Class (6 people)
station_load.18=1020.00, -20.00, 0, 0.00 // Economy Class (6 people)
station_load.19=1020.00, -24.00, 0, 0.00 // Economy Class (6 people)
station_load.20=1020.00, -28.00, 0, 0.00 // Economy Class (6 people)
station_load.21=1020.00, -32.00, 0, 0.00 // Economy Class (6 people)
station_load.22=1020.00, -36.00, 0, 0.00 // Economy Class (6 people)
station_load.23=1020.00, -40.00, 0, 0.00 // Economy Class (6 people)
station_load.24=1020.00, -44.00, 0, 0.00 // Economy Class (6 people)
station_load.25=1020.00, -48.00, 0, 0.00 // Economy Class (6 people)
station_load.26=1020.00, -52.00, 0, 0.00 // Economy Class (6 people)
station_load.27= 618.00, -56.00, 0, 0.00 // Galley
station_load.28=19788.00, 22.00, 0, 0.00 // Cargo/Baggage Fore Hold
station_load.29=7432.00, -29.00, 0, 0.00 // Cargo/Baggage Aft Hold
max_number_of_stations=30
empty_weight_CG_position=-0.00,0,-0.00 // (feet) length,side,up
reference_datum_position=0.00,0,0.00
empty_weight_roll_MOI=7837897.000000
empty_weight_pitch_MOI=15313596.000000
empty_weight_yaw_MOI=14379742.000000
empty_weight_coupled_MOI=1300.000000
However, the Payload Editor has only 4 stations available to configure plus two cargo stations.
My question for this case is ... how do I convert the 22 passenger stations in my aircraft.cfg file to the 4 passenger stations available in
the Payload Editor?
Thanks in advance,
Lluís
Just as an example, the Weight a& Balance section of my DC85 is:
[weight_and_balance]
// Total Weight : 310,600 pounds (140,885.05 kilos)
// Fuel Weight : 120600 pounds
// Zero Fuel Weight: 190,000 pounds (86,182.10 kilos)
// Payload Weight : 51,734 pounds (23,466.03 kilos)
// Baggage Hold Wt : 8,448 pounds (3,831.93 kilos)
// Food/Equip Wt : 705.00 pounds (319.78 kilos)
empty_weight=138266
max_gross_weight=325000
station_load.0= 645.00, 49.00, 0, 0.00 // COCKPIT: Flight Crew and their stuff
station_load.1= 362.00, 44.00, 0, 0.00 // Fore (2) Attendant(s)
station_load.2= 362.00, -56.00, 0, 0.00 // Aft (2) Attendant(s)
station_load.3= 87.00, 44.00, 0, 0.00 // Galley
station_load.4= 680.00, 39.00, 0, 0.00 // First Class (4 people)
station_load.5= 680.00, 34.00, 0, 0.00 // First Class (4 people)
station_load.6= 680.00, 29.00, 0, 0.00 // First Class (4 people)
station_load.7= 1020.00, 24.00, 0, 0.00 // Economy Class (6 people)
station_load.8= 1020.00, 20.00, 0, 0.00 // Economy Class (6 people)
station_load.9= 1020.00, 16.00, 0, 0.00 // Economy Class (6 people)
station_load.10=1020.00, 12.00, 0, 0.00 // Economy Class (6 people)
station_load.11=1020.00, 8.00, 0, 0.00 // Economy Class (6 people)
station_load.12=1020.00, 4.00, 0, 0.00 // Economy Class (6 people)
station_load.13=1020.00, 0.00, 0, 0.00 // Economy Class (6 people)
station_load.14=1020.00, -4.00, 0, 0.00 // Economy Class (6 people)
station_load.15=1020.00, -8.00, 0, 0.00 // Economy Class (6 people)
station_load.16=1020.00, -12.00, 0, 0.00 // Economy Class (6 people)
station_load.17=1020.00, -16.00, 0, 0.00 // Economy Class (6 people)
station_load.18=1020.00, -20.00, 0, 0.00 // Economy Class (6 people)
station_load.19=1020.00, -24.00, 0, 0.00 // Economy Class (6 people)
station_load.20=1020.00, -28.00, 0, 0.00 // Economy Class (6 people)
station_load.21=1020.00, -32.00, 0, 0.00 // Economy Class (6 people)
station_load.22=1020.00, -36.00, 0, 0.00 // Economy Class (6 people)
station_load.23=1020.00, -40.00, 0, 0.00 // Economy Class (6 people)
station_load.24=1020.00, -44.00, 0, 0.00 // Economy Class (6 people)
station_load.25=1020.00, -48.00, 0, 0.00 // Economy Class (6 people)
station_load.26=1020.00, -52.00, 0, 0.00 // Economy Class (6 people)
station_load.27= 618.00, -56.00, 0, 0.00 // Galley
station_load.28=19788.00, 22.00, 0, 0.00 // Cargo/Baggage Fore Hold
station_load.29=7432.00, -29.00, 0, 0.00 // Cargo/Baggage Aft Hold
max_number_of_stations=30
empty_weight_CG_position=-0.00,0,-0.00 // (feet) length,side,up
reference_datum_position=0.00,0,0.00
empty_weight_roll_MOI=7837897.000000
empty_weight_pitch_MOI=15313596.000000
empty_weight_yaw_MOI=14379742.000000
empty_weight_coupled_MOI=1300.000000
However, the Payload Editor has only 4 stations available to configure plus two cargo stations.
My question for this case is ... how do I convert the 22 passenger stations in my aircraft.cfg file to the 4 passenger stations available in
the Payload Editor?
Thanks in advance,
Lluís
Lluís del Cerro
VATSIM Supervisor
VATSIM Supervisor