Wrong Landing Airport

[Ghost66]

Hallo,

i`ve a problem with my FSPax for FS2004.

My first flight after starting the FS and FSPax is working fine. All following flights have the wrong Landing Airport.

When i restart the FS the first flight is working fine again there after my problems are the same as before.

The programm was reinstalled without to solved the Problem.

My System
Asus P6T6 WS Revolution
Intel I7 920
4GB Ram
Geforce GTX295

Thanks for help and sorry for my bad english

Reiner

[whiskey-zulu]

Are you absolutely sure you're inputting the correct destination ICAO code into your flight? Can you post a couple of flight reports: one that worked
and one that gave the wrong airport?

[Ghost66]

Hallo,

yes i`m sure that i have inputting the correct Arrival Airport





The second Departure (UUEE) and the Arrival Airport (LPPT) are Standart FS2004 Scenery.


Best Regards

[whiskey-zulu]

Ok, first off, can you reduce the size of your images or simply post the logs in text as even on my computer, they're still loading after 5 minutes.

Your second report is showing your departure and arrival airport as UUEE, which certainly sounds like you didn't reach LPPT. Failing this, LPPT may
not be in the FSP database for airports.

[Ghost66]

Hallo,

i`ve checked the Icao_db.cfg

LPPT is available in the Database,

[whiskey-zulu]

Do you load each flight from the main menu in FS9 or do you hop in-sim, starting all your flights from within the sim and creating flight plans in-sim?

[Ghost66]

Hallo,

the following processes do I with my Flights

for the first flight of the day

1. I´m creating my Flight with FSBuild.
2. Open FS
3. Switch to the departure Airport

at Departure Airport

1. Load Flightplan into FMC of my Aircraft and into IVAP
2. Starting FSPax
3. Load Pax with real time

Starting Flight

at Arrival Airport

1. Set Parking Brake
2. Shutdown Engine
3. Reload Pax
4. Stop Flight

For the next flight switch to FSBuild create a new Flight and starting with Departure Airport

Best regards

[Ghost66]

Hallo,

A special info enclosed

If you open the Report before closing Flight the arrival Airport is the correct one.

Best Regards

[DSW334]

The second flight is showing a failure on the a/c. Apparantly you did not declare an emergency, but perhaps did land at another airport? In
that case you will still get penalized, because you did not declare an emergency.

You need to declare an emergency to prevent from being penalized because of landing at the wrong airport.

[Recon]

DSW334 wrote:
The second flight is showing a failure on the a/c. Apparantly you did not declare an emergency, but perhaps did land at another airport? In
that case you will still get penalized, because you did not declare an emergency.

You need to declare an emergency to prevent from being penalized because of landing at the wrong airport.

You just beat me to the punch to write that....