Problem with door

[darnoc]

I was taking off and suddenly the co pilot asked me to land immediately at V2 ... and it was then when i start to hear the wind stronger and
stronger. I checked the plane out and the extrior seems fine... As I continue above 10,000 ft the passengers starts screeming and the
flight attendent came yelling that there is a problem with the some passenger... the warning came up saying that the pressure is ovoer
100%. Reduce to 5000 ft and then to 3000 ft... still the strong wind following the aircraft... Announced Mayday and decided to turn back to
the airport I departed from. Made landing safetly and passenger left the aircraft...

Report then showed that I forgot to shut the door...???? how could that be when the doors shuts automatically when the passengers
were loaded...

I did play around trying to open other doors eg. cargo but it never opened. Could it be this?

Meljet 777/300

[Usty]

It seams there is no problem with your door at all! you tryd to open them, and they funktioned as should :P

at first: very smart to try open carco doors in flight! :P

second, did I already mention that cargo doors are most commonly non-plug type doors, which hold spants and stringers that contribute to the total airstructure, and opening them in flight will initialy cause explosive decompression, and next the airstructure would probably fall apart becouse it is not a complete
structure anymore :P

bright! :D don't tell your boss :P

Rico



Post Edited ( 02-27-06 12:49 )

[FsP Dennis]

Maybe you has forget to close your door when you taxi bacause if you taxi over 30kts FsP think you are takeing off...

[pdjpeter]

or u just wanted a nice "breeze" on take off

[B_Sturm]

It is frustrating when a person asks a valid question and gets foolis remarks in reply!

[runibl]

That's wierd if it's set to atomaticly close after boarding, i'm not sure if cargo doors are implemented in FsPassengers. Are you sure you didn't
accidently open them again before takeoff, I did that once when my finger slipped from Shift +3 to shift + E.

[darnoc]

Thanks B_sturm,

If I accidentally open the door, which i did not! why was the doors all closed while airbourne...that was the first thing I checked. I was
wondering if I was playing around with the cargo door "while loading" . Meljet says that it works but after trying it did not so I left that
attempt. However, my only question from the begining was is the meljet cargo door funtionable? Did it open without visually showing on
screen...eg so it opened but I cant see it. That is why the problem occurs... Could this be the case , if not then it might be some
malfunction somewhere.

[runibl]

I have tried the Meljet, but never looked to check the if the doors visibly opens. But I think they should be visible. I can't check since I don't
have it installed right now.
If they are functional, then you might have come across a bug.

[Kahlua]

I dont use the Meljet, but if I left my Kitty Hawk 737-800's Cargo Door Open what you described would happen...

[darnoc]

My conclusion is quite sure that the cargo door was opened but did not show on the screen. Meljet 777/300 cargo door might work on
MSFS2002 but not on 2004...

Any comment on this..

[burkino_026]

Exit 2??? anyone???

I mean, FsPassengers does not only detect exits one, there is actuallty also exit 2, SHIFT+E and 2 very quickly after.
Meljet uses door 2 to activate the cruise mode in the cabin, I had this the first time i used beautiful Meljet 777 with eccellent FsPax with all
penalties still on. When i activated the cruise mode i had a decompression and had to abort FsP flight not to spoil the FS flight which was going
perfect.

I realised that by pressing door 2 u activate the cruise mode and that FsP detects it as cargo doors have been opened and thefore a critical problem
occurs.

The solution is disabling the door check when u fly on Meljet 777 and planning to use the cruise mode.
You can disable the door check by editing the more_options.cfg file located in the FsPassengers folder. Read the manual if you need details.
Just change it to 1 to disable the penalty