fs passenger crash

[vgage]

Hello to all.
I am flying with the "fly the airbus fleet" by abacus. I am flying with the a 310 and when I go to check in flight within 10 mins after take off
and at cruise level I get a message that fs aborted because my plane changed location when it did not and I am not slewing the plane to
a location. No cheat at all. All of a sudden my passengers get a fear of 100 percent and then fs disappears on the top bar, I have to restart
fs9. A little help please

[samiranks]

i think its the problem of you still operation fsp in demo mode. you may want to go to fsp check at the bottom when you click on
fspassenger scroll down and see if its asking for you to enter your unlock key and name if so thats the problem.

[vgage]

no I am in full mode and it tells me thank you for purchasing the product. I have tried different planes and the same problem around 6-
10000 feet i check in flight report and i get fs aborted due to plane changing location. any ohter suggestions thanks

[samiranks]

well i know that has happened to me before and what i did was back up my data file within fspassengers and redownload again. Usual
that fixed the problem. Oh remember to do the update after initial downloa that should work

[psolk]

By any chance is this with Cloud9 Amsterdam?
-Paul

[vgage]

yes i do have the cloud9 amsterdam. is that a conflict with fs passengers. and if so how can i reslove this issue. I just did a flight from
lebl to lesb. did not look at in flight report until i landed and taxi to parking set brakes and then as passengers were unloading I got the
message "fspassenger aborted,location change" If anyone can help thanks. I have a lot of add on scenaries such as cloud9 aviano,
amsterdam, along with "fly tampa-seattle add ons. list goes on. I like the realistic airports. thanks guys. I will be checking back tonight
often for ideas.

[Dutch64]

I thought the issue with cloud9 eham was aircraft change or so, not location change but i might be wrong. Anyhow, that issue was solved in the latest
patches of eham (2nd patch is out now) location change can have several causes.. I've read something here on the forum about it some time ago, do a
search for it please (and make sure to select "search all forums" in the drop down box )

[vgage]

i deleted the aerosoft dill that game with some of the aerosoft airports, seems to working fine now. thanks pass the info along

[vgage]

i was wrong, deleting the aerosoft dill, that was not the issue so if anyone have any hints on this problem please let me know. thanks

[vgage]

ok I have tried everything from re install and following all advice on this subject. To thosw who have no problems Bravo Zulu to you. As for
me I just have a headache from the location changed crash. I updated all my add on scenes with patched and updates. This will be a
nice add on once the bug is taken care of. I managed to get it down on the airplane I fly. i have fhe abacus "fly the airbus fleet" If I use the
310, 319 it will crash. If I use the 320, 330, 340 no crash. I also have the abacus airbus 380 which does not have a problem. The perfect
flight airbus seems to work as well. So in conclusion It seem to be a add on planes bug which causes the location crash. I am using the
Boeing 7e7 as my plane to fly now and no crashes yet. Nice textures on that plane. No virtual cockpit and uses default 747 panel but I am
sure people can find a better one. Good luck with this problem to all who have it and hopefully a new patch will come out soon. I hope
they put back the gmt time back in.

[VirginExpress freak]

I Haven't had any flight where FSpas didn't crash. I fly the PIC 733 all the time, now every time the pax start to load somewhere in that time
it stops loading. The music is still playing but the FSpas menu is gone and can't turn the music off.

Regards Jorik

[DanSteph]

did you tried all of this post ?:

http://www.fspassengers.com/forum/showth...p?tid=4818

For "location change" it might be because your PC is slow ? wich FPS do you have ?

Dan

[VirginExpress freak]

Pentium4 3ghz
1024Mb DDR RAM
256Mb 3D ATI Radeon 9600Pro.

I have the latest version.
If I take the "check for updates" in the menu and then he tells me there are now updates availble.

Regards Jorik

[VirginExpress freak]

Just updated my graf driver and still doesn't. I tryed for direct loading the same problem after a few minutes it stops running and I can't
shutdown the ambiant sound any more, and the menu is gone.

Regards Jorik

[DanSteph]

mail me your username perhaps an authorization problem ?

Dan