retsigeR 
|
Go-around
|
22-11-2005, 02:09 PM
I noticed that FSP never recognises a go-around.
Can anybody understand why? Or what I should do so FSP will recognize a go-around? Tasos.
22-11-2005, 03:30 PM
What exactly do you want to be different if it to were to recognize a go-around?
Chris Wren
22-11-2005, 04:25 PM
ehm..
I don't want anything to be different.... I just want to know when/how FSP recognises a go-around? Tasos
22-11-2005, 04:28 PM
Thats why you have an additional 15% fuel when you calculate how much it will take to get to your destination.
When you calculate how much time it will take, if you are late due to go-arounds then your pax get upset due to taking longer than it should.
- - - - - - - - - - - - - - - - - - -
I hate 2D Panels - VC is the ONLY way to fly! Air Spruce and Keezaire - Rank: Both C23 ![[Image: sdc23.jpg]](http://www.fspassengers.com/images/banner/sig/sdc23.jpg) FsP ANSWERS: http://www.fspassengers.com/?action=faq
22-11-2005, 04:42 PM
Ok
I don't know if you understand my question? When I have to go-around, there is no announcement to my passengers. How can I make FSP to recognise my go-around, so my flight attendant will announce this to my passengers? Tasos.
22-11-2005, 05:17 PM
I know that most of the real world flights I've been on that we had to go around, it's usually the captain that will call the cabin and let us all
know what's going on. So you could always just "make an announcement" to the room around you that you're going around. 
Chris Wren
22-11-2005, 05:20 PM
Quote:Anastasios wrote: Quote:Anastasios wrote:How can I make FSP to recognise my go-around, so my flight So you do actually want something in FSP to be different, like I originally asked. You want the flight attendant to make an announcement that they currently don't make. That's all I was asking. It's much easier to answer a question if we all know exactly what it is you're asking.
Chris Wren
22-11-2005, 07:51 PM
There is an announcement in FSP that the landing is aborted. Only, when I do a go-around, it doesn't do the announcement.
Just go to your MSFS folder on your hard drive and look inside FSP. Sound, voicepack, etc. You will find an announcement for a go- around. It just doesn't work!?!? Tasos.
22-11-2005, 08:36 PM
Actually, FSP DOES RECOGNIZE GO-AROUNDS. I do recall that there needs to be certain conditions, and Dan had explained them a
while back. I don't recall them off hand, and I couldn't find anything on it in the manual. I'll let Dan know of this post, and hopefully he'll be able to shed some light on it. I've never had a missed approach with FSP, so I couldn't tell you what I did to get the announcement, etc. Actually, I'm hoping I'm thinking of FSP, and not FS2Crew when it comes to recognizing MA's. I know FS2Crew does.... I'll get Dan over here though 
22-11-2005, 08:38 PM
Quote:Plane Nuts wrote: I've been flying commercially for 3 (nearly 4) years now, and I've had ONE missed approach during actual flying (thousands of flights). In the military I had quite a few more, but that's a different story You must have always had some bad pilots (or bad conditions!)! Maybe they're just more cautious, eh?
22-11-2005, 08:55 PM
AHA!!! NEVERMIND! I found the solution... it's right here: http://www.fspassengers.com/forum/showth...71#pid7871
As I thought, you must press the aircraft's TO/GA button!  Why I didn't mention that earlier, I have no idea! Well, if you do what Dan mentions on that thread, you will get the complete FSP simulation of a Go-Around/Missed Approach! A solution at last!
22-11-2005, 09:02 PM
AAAAAAAAAAAAAAAHHH
WONDERFULL!!!! Thank you very much, I'll try it out haha Tasos.
22-11-2005, 09:19 PM
Glad I could help! It turned into a mission for me as well! I'm going to try it out this afternoon just to see how it works!
22-11-2005, 09:21 PM
Quote:Anastasios wrote: I humbly apologize for my incorrect response. Feel free to refer to me as "That dumbass who has no F*CKING idea what he's talking about" from now on if you'd like. 
Chris Wren
22-11-2005, 09:25 PM
no time to reply that brad found the solution already...
of course he's right: http://www.fspassengers.com/forum/showth...71#pid7871 Cheers Dan Post Edited ( 11-22-05 21:27 ) |
|
« Next Oldest | Next Newest »
|
![[-]](http://www.fspassengers.com/forum/images/collapse.png)
