Feul

[JAF Pilot]

Hi something weard is happening,when I load the aircraft and put the feul something going wrong,my feul it always stays 15%,even if i put max 100 % it
stay at 15 % ,what is wrong ?

[Joeflyer]

Well, ok...one question I have so far is this: what airplane are you trying to load with fuel? There are other questions that can follow this one but
you need to do your part and provide as much information as possible.

[JAF Pilot]

the plane is I fly 737.

so i getting the feul into fs pas like 22700 lbs ,normaly fs tells me i'v got 45% of feul,but i only get 15% ,if i put full of feul it always give me
15% of feul,when you press CTR+ 3 times Z in the upper corner of our screen you can see the % of feul...

[Shaney]

Hi JAF Pilot,

I use the iFly 737NGX on FSX and have never had this problem when using fspassengers or with any other addon. I know that doesnt solve your problem
but it suggests that this is unlikely to be a wider problem with the iFly and FsPassengers.

Are you putting fuel onboard through the iFly config manager first or through the actual fspassengers fuel load manager?

Sorry Joe if ive nicked a question haha.

Shane

[JAF Pilot]

trough fspassenger only, that will be the problem i guess

[Shaney]

Not neccesarily, i load fuel into my plane through fspassengers only. I have to admit i really dont know what is going on mate. Sorry

Shane

[Wreck1463]

I had this problem with a different aircraft, and the problem turned out to be that the APU was running. Try shutting down both engines and the APU,
and then try loading fuel with FSP, see if that works.