pressurization

[jim0205]

hello,

as manage the pressurization fspassenger?

ps: sorry for me english, me speack french

[whiskey-zulu]

If it is easier, feel free to post your question in French.

Si c'est plus facile, ne ne se gêner pas poster votre question en français.

(apologies for any bad French; mine is very rusty)!

[jim0205]

ok après 12000ft les passager panique pour pressure

mais comment augmenter diminuer sa? ou simplement l'enlever

[whiskey-zulu]

Ah, je comprend, mais j'ai ecrivé en anglais.

If you are pilot rank C1 and flying an aircraft like a Cessna 102, then that is not pressurised in real life. If you want it to be pressurised you can
edit the payload model by going into the payload editor, selecting the model you use. after that, you will need to check the box "this aircraft is
pressurised", then save the model.

[jim0205]

mais non je vole avec les airbus wilco A318 j ai modifié payload de a318 pour enlever pressurisation mais une fois a 12000ft le pression
monte quand même que faire?? ((

[whiskey-zulu]

Is this the only aircraft you have this problem with?

[jim0205]

je n est pas essayé les autres XD mais je suis ennuyé car moi je ne vole que avec les serie 1 wilco pour ma va

[whiskey-zulu]

Ok. Can't say that I know of this problem with pressurisation being reported before with the Series 1 Wilco products. Can you try another aircraft
from that series and one of the flight simulator default aircraft, eg. Boeing 737-400 in FS9 or the A321 in FSX and see if they give the same issue?

[jim0205]

voila j ai essayé avec a320 default de fsx, même chose probleme de pressure cabine meme si je met disable pressure dans option payload
du menu fspassenger dans fsx sa change rien a 12000ft hop pressure cabine

[jim0205]

personne pour m aider

[whiskey-zulu]

We are looking into the issue, please be patient. We know that issues like this are frustrating, but they can take some time to resolve; in the mean
time please do not keep bumping up your thread to the top of the page.

Thank you.

[Doc3511]

peut-être vous avez forcé l'option de pressurisation en vol "et les aéronefs des paramètres" (Pre flight screen). Essayez de choisir que avion à nouveau, et choisir cette option sur AUTO.

google translator sucks...



Post Edited ( 07-13-10 18:28 )

[Doc3511]

it already happened to me.
i forced pressurization to manual in the payload screen i was just a click away from the solution. but it took me a lot of time to found that
out

[jim0205]

voila un screen du payload

http://www.casimages.com/img.php?i=10071...117934.png

même comme sa l'avion est toujours pressurisé
sinon comment modifier la pressurisation dans fsx une fois a 12000ft?



Post Edited ( 07-13-10 20:41 )

[whiskey-zulu]

On your screen shot of the payload, you have the bottom left box ticked - you need to untick that and save the payload model.