how do u fly an ILS approach

[TowerMan09]

how do u fly an ILS approach

[Drew]

http://tinyurl.com/ksvf2j





Post Edited ( 08-20-09 23:05 )

[the_nick]

LOOOL

[TowerMan09]

Drew wrote:
http://tinyurl.com/ksvf2j



Sorry

Well some of the tutorials r hard!

[Eastbeast]

I dont think so...I learned this from one video on youtube and on 737.
Set your destination in flight planner, make some short trip, around 50 mn between airports, you will have enought time to set everything.
But you must plan a IFR flght, that the controler will navigate you for aproach. Start IFR flight and take off for your cruise altidute, for short
flight like that plan a 8000 feet, that would be enoug. when you will be on FL080 and far enough from your destination ATC will give you
instructions for aproach about where you will land and about altidute and heading. Remember the number of runway that ATC will give
you /example 34R/ press alt key and go for world and then press on map. On the map find the runway 34R and there are two important
informations 1st: ils frequency example 108.90 and heading of the runway will be 340. Remember all of it and here we go. Ils freq type in
the Nav 1, switch for active and activate the radios. Then type the 340 in course. You should fly on autopilot. When you will be able to see
that you are near the localizer / blue triangles on GPS/ swith for NAV on the GPS/NAV knob. You now must have altidute hold and aproach
hold turned on. The aircraft will automatically navigate him self to the runway. But your job is not done yet, above 100 Ft up the the runway
turn off autopilot and you must now land on your own, FS aicrafts dont have autoland system.
I learned it from here.. http://www.youtube.com/watch?v=hUI7SJYdQrs

[TowerMan09]

Eastbeast wrote:
I dont think so...I learned this from one video on youtube and on 737.
Set your destination in flight planner, make some short trip, around 50 mn between airports, you will have enought time to set everything.
But you must plan a IFR flght, that the controler will navigate you for aproach. Start IFR flight and take off for your cruise altidute, for short
flight like that plan a 8000 feet, that would be enoug. when you will be on FL080 and far enough from your destination ATC will give you
instructions for aproach about where you will land and about altidute and heading. Remember the number of runway that ATC will give
you /example 34R/ press alt key and go for world and then press on map. On the map find the runway 34R and there are two important
informations 1st: ils frequency example 108.90 and heading of the runway will be 340. Remember all of it and here we go. Ils freq type in
the Nav 1, switch for active and activate the radios. Then type the 340 in course. You should fly on autopilot. When you will be able to see
that you are near the localizer / blue triangles on GPS/ swith for NAV on the GPS/NAV knob. You now must have altidute hold and aproach
hold turned on. The aircraft will automatically navigate him self to the runway. But your job is not done yet, above 100 Ft up the the runway
turn off autopilot and you must now land on your own, FS aicrafts dont have autoland system.
I learned it from here.. http://www.youtube.com/watch?v=hUI7SJYdQrs

cheers!

[AnsettAddict123]

this is how i learnt; take notes on the video and use them in the sim (that way you know the steps of what to do and dont screw stuff up)

http://www.youtube.com/watch?v=6-c710SHD...annel_page

its detailed and very easy to follow

good luck!!

[TowerMan09]

Thanks for all ur help