New to FSpassenger..!!!

[Shahab]

I basically got 2 situations that i need to be resolved. please help !

I recently started with FsPassenger, and i started a new company ( Air Canada) - A340-500, however i total amount of passengers that i
am receiving is only 10!!! out of possible 200+ passengers.... i was wondering, how can i increase the amount of pasengers to get in my
aircraft... Pretty useless if im only traveling with 10 passengers from lets say Toronto-England in a Airbus..

Last..Just for a free flight.. i want the sounds of the crew to be on the aircraft when i fly. This is not to be in econmic situations.. only for
free flying. How can i get the sounds of the co-pilot and the crew to still work, if i want to fly freelly.. assuming it is a airline tranporter tthat
im talking about :D

THANKS again.. im sure to get more use to this. with the help of you guys..

Shahab Mobasheri

Toronto Ont.

[Drew]

Welcome to the forum.

1. when the payload screen comes up, is the payload model actually of a a340-500, or something like a learjet
Could you take a screenshot of the payload page?

2. start fsp the same way but do not have the parkbrake on when you do so



Post Edited ( 07-03-06 18:33 )

[Shahab]

how do i add a image to this ??? i got the image ready but cant paste it..

[Drew]

either upload it to somewhere like photobucket.com (its free)

or you can email it to me, addy in profile......

[xhado13]

or go to imageshack, http://www.imageshack.us

Once you upload the pictures, copy and paste the direct link. then it should look like this

Example

What is done is [ img ] http://img383.imageshack.us/img383/6495/woo4on.png [ /img ]

Just remove the spaces between the [img] and [/img] and put in the link of your picture(s)



Post Edited ( 07-04-06 02:28 )

[Joeflyer]

Xhado...I see you took care of the antialiasing thingy...VERY nice pic!

[xhado13]

lol yes I did, ty

[Shahab]

Hello everyone,

This is actually going to be my last attempt in trying to get fspassenger to work properly with both hoostes and the actual passengers,
so plz try to bare with me.

I just want any1.....doesnt matter who.. to tell me how to hear the hoostes on the plane and how to gget the passengers to board the
plane!

its really getting annoying for me.. I load a perfect flight.. there are i.e. 313 passengers on the payload.. but on minidisplay, shows NO
PASSENGERS BOARDING!! and no Hoostes available " Co-pilot says" like ???
OR
I get no hoostes on board the flight.. and all passengers there..

LIke what am i missing here?? i went through 60 pages of intro, and payloads.. makes no sence..

i just guess im not ready to even use fs9 yet...y bother getting fsx..

[xhado13]

ok here, this is an example payload model (from the homepage sorry Dan )



Now you should see those little grey bars indicating how many passengers you want.

The more you move it to the right, the more passengers you get until the all the passengers are on board, or how wver many you want.

Once done, select your fuel capacity, and your cargo capacity (space weght, what ever you want to call it)

Then either Load immediately or Real time load

If you choose Load immediately then the passengers are already on.

As for Real time load, you have to press Shift + E to open the doors (Default)

Wait for the timer to go down, and they will all be aboard.

Now the same for unloading the passengers, except you must press Shift + E (Default) to open the doors for all passengers to come out.

[runibl]

I'm assuming you have started a company and have the plane in the company.

1. Select aircraft, Location, weather and time of day. And load it so you are standing on the ground ready.
2. Make sure the Parking brakes are set. Go to the FsPassengers menu and select FsPassengers Flight/Start Flight.
3. In the payload dialog, select the correct payload model, select the amount of fuel to load, Use the sliders to select how many pax andn cargo you
want onboard. If you want you can go into Set Destination and select arrival airport and flight time.
4. Double check. Then select either "OK - Real Time load".
5. at the load manifest screen, you can see how many pax, fuel you have boarded. And also get info about weight of the plane etc. Pres the ok button.
6. If you selected Load immedietely then you should be all set with pax onboard and ready to go.
7. If you selected Real time load then you need to open the doors to get the passengers onboard, default "Shift + E".
8. After loading is complete you should be ready to go (if seat belts is not automatic, then turn them on "CTRL + Shift + B").
9. Release the parking brakes and taxi to the runway, make your flight etc.

For a sounds only flight:
1. Select aircraft, Location, weather and time of day. And load it so you are standing on the ground ready.
2. Make sure your Parking brakes are NOT on. Go to the FsPassengers menu and select FsPassengers Flight/Start Flight.
3. make your flight etc.

I hope this help. If still experiencing problems or have question. Ask and we'll help.