New User having issues

[bush_pilot]

I've looked through the forums for assistance on this issue, but couldn't find a link.

When I begin a flight with FSPassengers 2015 (purchased Nov. 14, 2015) and using an A2A Piper J3 Cub (I know; it's a tiny plane with only one
passenger and I'm in for all sorts of issues with turbulence and all), I cannot continue to fly the plane. Shortly after takeoff, the turbulence will
begin and the simulator (FSX+Acceleration in Windows 10) will begin a period of freezing and releasing, freezing and releasing. This will stop when I
get the chance to abort the FSPassengers portion of the flight. Then I can continue the flight as before FSPassenger was run. Any ideas, suggestions
(please, no taunts)?

Log for last flight (very similar to previous ones):

Searching banner skin
Config file saved
Searching banner skin
Config file saved
Detect parking brakes available:
Parking brakes available
Function MM GAFN32 start
Function MM GAFN32 end
Function MM GAFN32 start
Function MM GAFN32 end
Payload ini> search loadmodel for: A2A Piper Cub AKA
Payload ini> Loading : cub
Payload ini> Loaded: cub.ini
original CGPos= 0.24756
Payload ini> search passenger lon: -133.67 lat:59.58 maxpass: 1
Payload ini> zone nbr: 0 use zone list name (self-1): 0 passengers found 2
Fixed gear aircraft, force belly landing disabled
Don't Use FSP ATC ID
Starting FsPassengers adventure
Function ForceCrashAndCollideFlag
Function ForceCrashAndCollideFlag end
Loading Crew sound from user chosen directory Sound/CrewPack\default\
Loading crew text, default voice pack used
Disabled penalty flag 55584
Call function GAFFA4645
END function GAFFA4645 found: 42
Call function RAFF43587
End function RAFF43587
Detect parking brakes available:
Parking brakes available
Movies_choices.cfg loaded movies availables: 6
Config file saved
Total Percentage of failure= 0
Pausing FsPassengers adventure
UnPausing FsPassengers adventure
Pausing FsPassengers adventure
UnPausing FsPassengers adventure
Pausing FsPassengers adventure
UnPausing FsPassengers adventure
Pausing FsPassengers adventure
UnPausing FsPassengers adventure
Gps release
Ending FsPassengers adventure

The part in bold is the part where the struggle comes. The sim pauses and unpauses.



Post Edited ( 11-15-15 01:12 )

[Joeflyer]

This could be related to Windows 10 but I am not certain. Can you run FsP with other aircraft and without issues?
If you can use FsP at all with Win 10, you are one of a few lucky ones. Most cannot. Dan the developer will look into this after he has completed
the FsP update for Prepar3D. Win 10 was released after Dan had most of the updates completed for earlier versions of Windows.

[SamTDS]

@joe he is using the beta guessing from the publish date
@bush_pilot a2a planes have had problems with fsp before and have you tried the current release and not the beta?

[Joeflyer]

"purchased Nov. 14, 2015"....says nothing about which FsP version published.

[bush_pilot]

The version of FSP was the one being offered as a demo. Going to uninstall and then clean all references. Then will download from the Store and try again.

I am currently experimenting with P3Dv3. I've backdoored all the Orbx scenery using a bit of moving scenery.cfg and terrain.cfg files and renaming the main directory. I am currently flying around SAK with no issues and great scenery. So I will be looking at FSP for P3Dv3 when it comes out. But in the mean time I'll check some of the things you guys talked about. It could be the small plane was just too overwhelmed by the program.

Thanks for your responses.



Post Edited ( 11-17-15 05:04 )

[SamTDS]

bush_pilot wrote:
The version of FSP was the one being offered as a demo. Going to uninstall and then clean all references. Then will download from the Store and try again.

I am currently experimenting with P3Dv3. I've backdoored all the Orbx scenery using a bit of moving scenery.cfg and terrain.cfg files and renaming the main
directory. I am currently flying around SAK with no issues and great scenery. So I will be looking at FSP for P3Dv3 when it comes out. But in the mean time I'll
check some of the things you guys talked about. It could be the small plane was just too overwhelmed by the program.

Thanks for your responses.

there was a new updat3 a day or two ago

[bush_pilot]

I am claiming "no joy" in the attempt to use FSP 2015. The pause/unpause cycle continues to make matters unplayable. So I've unstalled one last time
and have contacted the seller, requesting a refund.

I may revisit the possibility of purchasing a different license when the modifications are complete for P3Dv3. We'll see what the forums hold over the
next couple of months. Thanks for all the help.

[DanSteph]

bush_pilot wrote:
The version of FSP was the one being offered as a demo.

I'm not sure that all resellers link to the latest release. Better try with the download here.

Kind regards

Dan

[S.Gerard]

Hide the fspax mini panel (ctrl+shift+V)

Worked for me in turbulent weather using PMDG 737, ant take it back up when there is no longer any turbulence