[Solved]FS Passengers keeps resetting (fs2004)

[DVA767]

I recently purchased FS Passengers and on the first attempt of using it, it seemed fine. All of a sudden, I got a
repeat of the safety
announcements from the cabin crew, some passengers were lightly injured and when clicking on the FS
Passengers menu > FS
Passengers Flight it only gave me the option to Start Flight - Load Aircraft. This happened 3 times between push
back and reaching the
threshold.

Has anybody encountered this before and found a solution? Could it be that I'm using the Level-D Simulation 767
package and the Wilco
737 PIC package?

Any help would be most appreciated.

Thanks.

[Joeflyer]

It would help us if you gave us more information about your system specs

[DVA767]

Hi

OK:

Intel Dual Core @ 2.00GHz
3GB RAM
3.5TB Disk Space

Running:

FS2004 COF
Level-D 767
Wilco 737 PIC
PMDG 747
FSUIPC
FS Copilot

I fly for Delta VA so I'm connected to their ACARS system for all my flights.

Is there anything else you need?

[Joeflyer]

How about Operating System? This could be the culprit

[DVA767]

Lol, sorry - that's quite important.

Windows Vista Home Premium.

[Joeflyer]

Ahhh, the dreaded Vista system

First, did you check the FAQ? If not, this may give you a start:

http://www.fspassengers.com/?action=faq&...uestion=70

Also, other people have had issues with Vista and running FsP with other addons. You may want to do a thorough search in the support
forum as well as FsP General section regarding possible solutions. Moreover, it may come down to you having to save a copy of your FsP
database in a safe location, uninstall FsP, reboot your pc and then reinstall FsP....reactivate with your code of course. Once done, you can
move your saved database back into the FsP folder so that you can keep your original company info.

By the way, this sticky may help,too:

http://www.fspassengers.com/forum/showth...p?tid=6879



Post Edited ( 07-08-10 16:34 )

[DVA767]

Thanks for the info. I'll try the easy option first (running FS9 as an Admin). If that doesn't work, I'll try the reinstallation. Any further problems, I'll
be sure to report back.

Thanks again.

[Joeflyer]

Good deal

[DVA767]

I did the 'Run as Admin' procedure and it seems to have fixed the issue.

Thanks so much

[Joeflyer]

I like it when a plan comes together...congrats