20-07-2012, 01:52 PM
Hi,
Maybe it isn't fspassenger s problem, maybe is it the plane aircraft.cfg, I think it is in generalenigedata like on my is economical
[generalenginedata]
engine_type = 1
fuel_flow_scalar = 0.60 <-------------
min_throttle_limit = -0.23
engine.0 = -6.00, -85.50, -5.50,
engine.1 = 20.00, -49.00, -8.00,
engine.2 = 20.00, 49.00, -8.00,
engine.3 = -6.00, 85.50, -5.50,
[turbineenginedata]
fuel_flow_gain = 0.00135 <------------
inlet_area = 35.00
rated_N2_rpm = 9750.00
static_thrust = 80214.00
afterburner_available = 0
reverser_available = 1
normally it should be 1 and anything that's above 1 change it's range and flight time, on my it is economical of the real data of the RR
engine, I think.
Maybe this help to solved other problem from aircraft.cfg invented or create by head.
Regards
Maybe it isn't fspassenger s problem, maybe is it the plane aircraft.cfg, I think it is in generalenigedata like on my is economical
[generalenginedata]
engine_type = 1
fuel_flow_scalar = 0.60 <-------------
min_throttle_limit = -0.23
engine.0 = -6.00, -85.50, -5.50,
engine.1 = 20.00, -49.00, -8.00,
engine.2 = 20.00, 49.00, -8.00,
engine.3 = -6.00, 85.50, -5.50,
[turbineenginedata]
fuel_flow_gain = 0.00135 <------------
inlet_area = 35.00
rated_N2_rpm = 9750.00
static_thrust = 80214.00
afterburner_available = 0
reverser_available = 1
normally it should be 1 and anything that's above 1 change it's range and flight time, on my it is economical of the real data of the RR
engine, I think.
Maybe this help to solved other problem from aircraft.cfg invented or create by head.
Regards