[SOLVED] Collision problem with FSPassengers

[neca12]

Sorry,I forgot that,I want to disable that because I fly on VATSIM,and planes in SB3 are not simulated precisely


// more_option.cfg
// In this file are value that allow you to tune, adjust enable
// or disable somes function or penality of FsP that are not
// listed in the setup dialog of FsP because they will be used
// rarely and only by a few users...

// penality disable ("=0" penality enabled "=1" penality disabled)

Disable250KtsUnder10000ft =1; // disable the 250kts speed below 10'000 ft penalty
DisableRollOutsideLandingStrip =0; // disable the roll or landing outside landing strip penalty
DisableGearSpeedLimit =0; // disable gear speed penalty
DisableFlapSpeedLimit =0; // disable flap speed penalty
DisableOverspeedLimit =0; // disable overspeed penalty
DisableGLimit =0; // disable G penalty
DisableBankLimit =0; // disable bank penalty
DisableReverseThrust =0; // disable reverse thrust less than 60kts penalty
DisableDoorCheck =0; // disable door open penalty
DisableFlapCheck =0; // disable flap not set penalty
DisableTimeAccelerationCheck =0; // disable time acceleration reduced bonus
DisableMaxPowerPenaltyWithBrake =0; // disable the penalty for pushing max power with parking brake.
DisableForceCollideDetection =1; // disable the 'force collide detection' feature of FsP
// other options

DisablePayloadDialogWeightModif =0; // This will forbid payload dialog to modify any weight. // aircraft that have external payload loader and
cause problem with FSP.
// BE WARNED THAT FSP PAYLOAD LOADER WILL BE FAKE NOW, YOU WILL LOAD
// PASSENGERS BUT THE WEIGHT WILL NOT BE UPDATED.
DisableForceCrashDetection =0; // disable the "force crash detection" feature of FsP
DisableForceCollideDetection =0; // disable the "force collide detection" feature of FsP
EnableTimeModificationInFlight =0; // enable access to Fs2004 time dialog when in flight
DetectSpeedRollOff =35; // Speed at wich FsP start to detect if you roll off landing strip
MainLoopDelay =100; // DON'T TOUCH THIS UNLESS YOU REALLY KNOW WHAT YOUR DOING !!!!