FSP and PSS Airbus landing lights

[Drew]

i cant help as i dont have the plane or the panel, but this is from the FAQ

How to make a succesfful flight in realistic mode:
1. Prior to start the FsP flight shutdown all lights and all engines.
2. start the FsP flight.
3. Start beacon.
4. Start Engine.
5. Release parking brake.
6. Put strobe and landing light on.
7. Take-off.
8. Put Off landing light when passing Transition altitude (10K feet usually)
9. Put On landing light when descending below TA.
10. Landing.
11. Put Off landing light and strobe when taxi speed below 30 Kts.
12. Set parking brake, Shut down engines.
13. End flight or shut down Beacon before ending flight.

is this what you are doing?