06-01-2009, 09:22 PM
Yep, I've got the Saitek yoke, rudder pedals and 2 throttle quads...took me very little time to get use to the set-up after using the X52 for a
couple of years. I tend to use the left rocker switch on the yoke ALOT while flying approaches...it's mapped to trim the airplane, so the
slower the airplane gets the more trim is necessary to keep from working the yoke so hard. A key to this is not having the sensitivity set
too high on the trim...mid way in the FS9 setting will do the trick.
couple of years. I tend to use the left rocker switch on the yoke ALOT while flying approaches...it's mapped to trim the airplane, so the
slower the airplane gets the more trim is necessary to keep from working the yoke so hard. A key to this is not having the sensitivity set
too high on the trim...mid way in the FS9 setting will do the trick.
See FsPassengers Frequently Asked Questions: FAQ
![[-]](http://www.fspassengers.com/forum/images/collapse.png)