Problems with FSPassengers and the A2A Piper Cub

[James8]

I purchased the Piper Cub from A2A and tried to load a passenger via FSPassengers program.

The loading takes place,however when prompted to "start flight" the plane immediately crashes.
( there is no problem with the FSX Piper Cub as the plane only starts when I apply the throttle )

I suspect that the brake is still applied but there is no way I can release it.Like I said: clicking on FSPassenger
"start flight" immediately starts the flight.

Does anybody have an idea of what I could try ? Is it somehow possible to load passengers
with no brakes applied ?

Thanks

James8

[poden]

So, you start FSP, and it starts OK. But then when you begin a flight and load a passenger, it crashes? If that's the case, it might be the cargo
model for the plane. Have you made a cargo model for it?

[James8]

poden wrote:
So, you start FSP, and it starts OK. But then when you begin a flight and load a passenger, it crashes? If that's the case, it might be the cargo
model for the plane. Have you made a cargo model for it?

No,there is no cargo version of this particular airplane ( Piper,2 seats,pilot and one passenger )
The problem seems to be that FSP does not allow the parking brake to be released and I wonder
if there is a way to load the plane without the parking brakes applied.
This only happens with the Piper Cub from A2A.All other planes work fine.

Thanks

James8

[Joubarbe]

I had other planes that crash when the parking brake is released. Are you sure it's related to FSPassenger ?

[James8]

Joubarbe wrote:
I had other planes that crash when the parking brake is released. Are you sure it's related to FSPassenger ?

No,I am not sure but I try to find the cause.I find it strange that it only happens with the A2A Piper Cub
which means it could be an issue with the Piper Cub program.By the way,what airplanes did crash ?

Herbert

[Joubarbe]

I don't remember what airplanes, sorry. Did you try in VFR/IFR plans ? As I remember, it crashed with VFR, but not IFR.