PSS Airbus Pro

[MS21]

I have PSS Airbus Pro and was wondering if there was a way I could overide the FSPassengers loading and use the PSS load
configuration utility to get my weights set the weight of the aircraft. The ZFW of the PSS utility and the PSpassengers load utility are
completly different. I need to know this for calculating my fuel for the trip.

[Dutch64]

Hi there, you can disable the payload option of FsP by changing this line
DisablePayloadDialogWeightModif=0 in the more_option.cfg. (change the 0 into a 1).
However, i do use the the same planes also and have no problems with it. What's going wrong?

[MS21]

Dutch64 wrote:
However, i do use the the same planes also and have no problems with it. What's going wrong?

No problems. I am just not sure which weight I should be using for calculating fuel.
So will the FSP payload editor override the PSS load config? If it does I assume it is safe to use the FSP weights to calculate fuel. Tell me if I
am wrong.

[Drew]

just to add to what dutch says...

editing that line will disable all weights for every aircraft you use

IMO (sorry dutch) your better off going to

start > programs > fsp > tools > payload editor

load up the payload for the plane, and then selection the check box to not change any aircraft weights

[Dutch64]

Oh i agree, but if you want to use the pss load config and don't like to use fsp load at all you have to disable it. But what drew says would be a
much better solution of course.

[Cydon Prax]

the PSS airbus is so cool-- Im flying the A330 right as I type this; magnificant model!

Also, i use FpS's loading screen instead of the PSS one; ofcourse the PSS one is more accurate but, you won't notice that much diffrence
im betting.

[MS21]

Thanks for your help. I have figured it out now.

[mienaqt]

does fs pax give a accurate ZFW on the airbus pro?

if not i suggest you first do the load edit on the default airbus load edit then go back to fspax so that you can get the ZFW