An interesting problem

[roadhoguk]

just got back into FS9 after a break of a year (i have FSX but boy does that suck for add-ons), i have reinstalled my add-ons and
FSPassengers but have come across a problem, started up the Airline and bought a Cessna 182 (default), but FSPassengers stated it
was not loaded correct and would modify the config file, ok, so let it do that and then started the flight as usual, all was ok untill landing
when for some reason the aircraft would not land properly, or to be more precise it was floating above the runway at 20knots with only 1st
stage flaps....hmm, ok i thought i lets try a Mooney then (Default) , same again, aircraft config wrong and FSP will adjust. you have to pitch
the nose right down in order to get it to decend and get the speed down to about 30 knots for a skippy landing.. i suspect that there is a
problem somewhere , any ideas please peeps.

XP
FS9 Patched
ASv5
MyTraffic 2006
Naval AI Traffic
Gary Summons UK Airports 1-7
FSP
FSUIPC3 (registered version)

System spec

3 GB Corsair Ram
Quad core 2400
Nvidia 8800GTX 720mb
Maxtor 500GB x3 Sata HDD
Maxtor 320GB x3 Sata HDD

[Joeflyer]

I don't suppose you've searched the "More Downloads" section for a payload model, have you? Well, I just searched and found only the
Carenado 182 payload model...may or may not work for the default 182, as the .ini file has to match the aircraft title in the aircraft .cfg file.
Hey, give it a try anyway.

BTW, welcome to FsP!

[roadhoguk]

hiya, yes i have downloaded another mooney file from the download section to no avail, even a 747 has to be forced to land and then it
will only touch down at 60kts , I have just done a full re-install off all files bar FSP though and its still doing it so its not FSP it would
appear, just coincidence it occured after the install. ahh well, back to FSX and the horrible waiting for FSP to appear for it



Post Edited ( 11-29-08 07:50 )