LTAC-VECC

[Joeflyer]

Uncheck lens flare...that one takes up more resources,too. Are you happy with the other settings? As for myself, I have MIP Map and
Hardware Render Lights at 7 and everything else is set to almost max. with the exception of cloud draw. I have that set to the lowest. Your
frame rates are locked at the same setting I have mine.

Now, were you able to set the AA and AF in your graphics card control panel??

[the_nick]

could you explain with a pic where I can see the FA an AA , because for this kind of stuff I'm to dumb

[Joeflyer]

I can't from this laptop. I'm away from home this week, so I won't be able to send you a screenie of what it looks like. Just go into your
control panel on your pc...there should be a Nvidia control panel there. Open it and you will find both AA and AF there. Wish I could be of
more help.

[the_nick]

that's no problem you were a great help already take a look at this :





it looks much better now , and my screen doesn't shake anymore during take-off
thanks a lot



Post Edited ( 09-11-06 21:08 )

[Joeflyer]

Mucho better...wooohoo! Happy to help After all, many kind people here have extended a helping hand when I've needed it...and that
was quite often! Anyway, happy flying!

[the_nick]

but when you can help me maybe more would you give it a ring plz thx already

[Dutch64]

Nick, you should disable "toepassing gestuurd" for interferentieinstellingen (AA) and anisotropisch filteren (AF). Then use values like 4x for it as a
start. (Maybe you figured it out by now already, just noticed the post )

[the_nick]

Dutch64 wrote:
Nick, you should disable "toepassing gestuurd" for interferentieinstellingen (AA) and anisotropisch filteren (AF). Then use
values like 4x for it as a
start. (Maybe you figured it out by now already, just noticed the post )

ok thx dutch64 I'm going to try it out now



Post Edited ( 09-11-06 21:25 )

[the_nick]

dutch what is the effect of this change ?

[the_nick]

I have this now , do I have to change more things ?

or does it has to be like this ???




Post Edited ( 09-11-06 21:34 )

[Dutch64]

Yes, and within fs9 make sure the AntiAliasing is off. Sometimes, the effect is only visible after a reboot

[the_nick]

ok thx for the really good support

[Joeflyer]

Happy to know everything is working out for you,Nick. Doesn't it make you feel good when a plan comes together?

[the_nick]

yes it does now it's finaly finished with those ugly headbanging graphics
this is now the result of the latest thing I (we) did on the settings




Post Edited ( 09-12-06 20:03 )