[SOLVED] PIC 737 and altimeter setting

[nmcguire]

I have had a couple of flights give me points off for not setting the altimeter before takeoff and after descending below
18000. I in fact know that
I did make the settings, I am flying the FeelThere B733 and use both the "B" key and the mouse click to set the altimeter.

Any Help?

thanks

[bribo]

Hi
I also use the PIC 737 but never had this problem, do you set the QNH only once after descending below Fl180? because sometimes it
changes a lot by the time you arrive for landing

Hope I helped you a bit
brian

[nmcguire]

Thanks Brian, I will try that the next time.

[carpless]

if you are using real weather.. then you need to use the b button at transion altitude FL180 (USA) and then again at about FL090...
also as soon as you get permission to land then check again... if using ILS I also give it a final check just before final desend on the glide
slope.... no more penalties.

Also check before Taxi and also before pulling onto runway after take off clearance.