PMDG747X DOOR OPENING problem

[Sanal]

I thought I will never have this problem again.I was wrong.

PMDG-747X I made a long flight from KJFK - PANC (Anchorage). At the gate, to open the door I clicked Shift+E , door visually opened but
FsP did not released passenger, informing " waiting for door open" I did every combination including PMDG keys for door
opening "Shift+E" and searched the forum again,.No solution.

May be this can help. One year ago I was loading pax to PMDG747X door opened,but FsP did not recognized. One member advised me
don't use the "OK-Real time load" just click "OK-Load immediately" I never had any problems until today.

. I tried to click "End flight". FsP closed with out registering the fligh and I lost 6 hours flight.

Will you please advise .
Thanks
Sanal

[Joeflyer]

I certainly wouldn't know what could be causing FsPX to not recognize an open door...unless the key combo got over written some how. I
don't suppose you made any changes in key commands lately, have you?

[Sanal]

Joe,
Thanks for your reply. My key combination same SHIFT+E for FS-PMDG

I went all the way back to 12-06-2005 in topic search, I found the following post from Dan. He was aware the problem , but has no
solution. He advised FsP short cut to eliminate PMDG door opening problems.

I wish this info were listed on FsP Support Sticker.
Regards
Sanal



-------------------------------------------------------------------------------------------


Re: Can't board passengers after update PMDG 747
Author: DanSteph <-Msg 4242 Posts Status: Forum administrator Date 12-06-05 20:57

Ah sorry just see this yet...

PMDG visibly don't use again the internal "door" value of Fs2004,
so FSP can't detect it as it should be a private value.

OR the door you see doesn't use the 1st or 2nd door value but another one (3st 4st?).

No way anyway for FsP to detect that...

Only solution is to "load immediattely" the aircraft and simply end the flight
by menu at arrival.

Dan