328 Jet

[Passenger57]

Since it is not only popular with me, I made a payload model for Mike Stone's 328Jet and it works just fine with it. It's already up in the download
section.

Fits also the prop version by R.Versluys, but that (FS2002 model) needs a weight adjustment, and, I still have some speed-related damage issues.



Thanks to all of You who constantly help to make this even better.

Torsten, the Pax57

[Passenger57]

Passenger57 wrote:
Fits also the prop version by R.Versluys, but that (FS2002 model) needs a weight adjustment, and, I still have some speed-related damage issues.

Hi Folks me again,

I did not want to accept NOT to fly the 328 or to diable the damage option, so I went ahead and buried further into the matter.

Altering these values in the aircraft.cfg worked fine for me - no more too-early gear-related takeoff damage. For all those who want to know the details I
recommend M$ aircraft container SDK . I also strongly recommend increasing the elevator/rudder/aileron effectiveness values since the (fs2002) FDE
handles like an overweight pig on tranquilizers.

I urge You to backup the original aircraft.cfg first and will not take responsibility for anything You might encounter....

[WEIGHT_AND_BALANCE]
empty_weight = 14665.000

[contact_points]
point.0= 1.000, 22.720, 0.000, -6.159, 3900.000, 0.000, 0.714, 80.000, 0.272, 0.572, 0.900, 7.000, 5.000, 0.000, 200.000, 220.000
point.1= 1.000, -1.917, -5.604, -6.256, 3904.803, 1.000, 1.014, 0.000, 0.272, 2.500, 0.581, 5.000, 5.000, 2.000, 200.000, 220.000
point.2= 1.000, -1.917, 5.604, -6.256, 3904.803, 2.000, 1.014, 0.000, 0.272, 2.500, 0.581, 5.000, 5.000, 3.000, 200.000, 220.000

Have Fun

Pax57



Post Edited ( 09-03-05 05:52 )