[Solved]Aircraft cant Move in fspassengers 2004 NEED HELP!!!

[zeez88]

My aircraft cant simply move in fs passengers 2004. After loading the flight ,and passengers board and i am set for departure
i start to press shift+p
to push back but i dont go anywhere. I also try to increase the throttle lever to move forward but still nothing.It is so
annoying after trying to fix
this problem many times but nothing good came out. I really need help out there.Anyone have an idea or anyone is capable of
fixing this problem. Btw
pushback and moving works perfectly when fs passengers is turned off.

[drgullen]

zeez88,

I'm wondering a few things just to be sure...

1) Which version of Flight Simulator itself are you using? (I am assuming FS9?)

2) Is this a new problem or were you previously able to pushback and move with FSP?

3) Are you by chance forgetting to disengage the parking brake or forgetting to close all doors during pushback? (Probably not, but I had to ask).

4) Is this happening with all of your planes that you fly or just one?

5) Have you tried creating a new company and trying to pushback with that one? I'm thinking perhaps your current company database is somehow
corrupted and is affecting things negatively.

I hope one of the above helps you out. Good luck!

[Joeflyer]

I am wondering if Zee disabled the parking brake indicator in the FS9 config file

[zeez88]

Still have the same problem at certain airports.And i dont get what you said regarding (ZEE).But its really annoting hope any of you can help me to
fix this bug.

[gbapache]

What he asked is.... did you relase the parking brake?

[Joeflyer]

"ZEE" = zeez88...I shortened it

[zeez88]

oo..lol..Well i did release the parking brakes but still no progress.I cant even go on slew.I just cant move at all really gets frustrating.

[Joeflyer]

Try this....completely uninstall FsP, but make a backup the FsP database folder FIRST. Reboot your pc, re-install FsP, and then enter your
registration number or serial code. Create a new company and try to make a flight from one of the airports you've had issues with. If it works this
time, there may have been something amiss with your original FsP database (the one you made a back-up of before you uninstalled FsP ). If this is
in fact the case, zip up the original database and email it to Dan to see if he can figure out what may be corrupted in the database. Of course you
will need to explain (in the email) why you are sending him your database.

Try the uninstall/re-install first and report back...

[zeez88]

Tried it Joe,Now its working perfectly i dont see any more problems regarding the issue.Thanks alot.Your help was really appreciated.

[Joeflyer]

Outstanding This case is closed then?

[zeez88]

Yeah For Sure.Just wanted to ask you.Do you have any idea how to fix overweight payloads.When i load a specific aircraft lets say without pax or cargo
just full of fuel in all tanks it goes upto 119% which is way above excess .With cargo and pax its like 150 or so. Any idea? Sorry to bother bro.

[Joeflyer]

That depends on the aircraft. Is it a payware aircraft that has its own load configuration manager? If so, you may need to open the load configuration
manager and set everything to zero and save it. That way, when you start to load the aircraft via FsP, you likely won't see the over limit scenario.
Also, open the payload model editor in FsP and check the cg of the aircraft .ini file for that particular aircraft. If the cg is bad, you should play
around with the values for each section to get a good cg indication.

[gbapache]

Accurat weights for many aircraft can be found at Airliners.net. Find the correct numbers there and adjust your aircraft.cfg accordingly.

[Joeflyer]

So true, Apache...more beer for you, lad