Wilco Airbus A319 trim for takeoff

[Dene]

Hi all,

I've asked this on many other flight forums but so far have not had a positive answer.
So I thought I'd post it here because I think it is an FSP issue with the payload model.

Whenver I do a flight an the entire aircraft is economy class I have no issues.
However, if I change the layout in the FSP payload model to first section business class [12 psx] and the main section economy class
[114 psx], the aircraft begins to life off the ground before I pull back on the stick.

Any ideas?

[DeepSpace]

As a matter of fact there shouldn't be a problem since there's an auto-trim that is taken care of by the FLCS. Although you can manually change the
trim with the default FSX keys.

In any case I do not face that problem.

[Recon]

Well to answer you question right we need some info about your t/o settings.
For example what is your trim-setting and flaps-setting?
The t/o-settings are dependend on the total-gross weight.
So fuel + cargo + pax + empty weight.
Of course some other issues are involved like lenght of the RW wind etc....but the main thing is your weight.

Best regards,

[JetlinerX]

Very odd situation, and I can see how it is irritating, but I do not have an answer sadly. I am doing my best to look into this, and possably
make you a new payload manager.

CHEERS!

[Dene]

Hi,

I've looked and tested etc, etc but still cannot get the aircraft to stay rolling along the rwy until V1 rotate and I pull the stick back.

Here's some additional info after I have started and filled in the FSP pre-flight page, if anyone can help:

Take Off Weight 141815 lbs
Fuel 1958 lbs
CG 43%
ZFW 128700 lbs
Payload Weight 9999 lbs
Passenger Weight 25200 lbs
Trim = o
Flaps = 1