01-05-2018, 11:40 PM
Hi all,
Been using FSPassengers for 8 years but for the first time ever I'm having serious problems with the payloads...
Absolutely nothing is matching up at all and the payload safety zone is always in the red and I can't takeoff properly.
CLS A330-300 and I'm trying to get it in the following config:
Total: 301
Business: 30
Premium Economy: 16
Economy: 255
This is how I have the fspassengers payload:
(Even if I have a good CG it doesn't work in FS9!)
Can anyone help please?!
Been using FSPassengers for 8 years but for the first time ever I'm having serious problems with the payloads...
Absolutely nothing is matching up at all and the payload safety zone is always in the red and I can't takeoff properly.
CLS A330-300 and I'm trying to get it in the following config:
Total: 301
Business: 30
Premium Economy: 16
Economy: 255
Quote:[fltsim.0]
productfolder=A330-300-RR
title=Air China A330-300 (B-6512)
sim=CLS-A330-300-RR
model=rr
panel=swr
sound=rr
texture=china
kb_checklists=CLS-A330_check
kb_reference=CLS-A330_ref
atc_airline=Air China
atc_flight_number=
atc_heavy=1
atc_id=B-6512
atc_parking_types=GATE, RAMP, CARGO
atc_parking_code=CCA
ui_typerole="Commercial Airliner"
ui_createdby="Commercial Level Simulations"
ui_manufacturer=Air China
ui_type=A330-300
ui_variation=B-6512
description=Commercial Level Simulations\nAirbus 330-300\nVersion - 2006.9.0-FSX\n\nFSX and FS2004 Compatible\n\nEngine Type: RR / GE/ PW
[General]
performance=Passengers\n2-class conf: 293\n\nCargo\n26\/27 LD3 containers \/ 10 Pallets \n\nTotal lower hold volume: 4,800 cu ft \n\nDimensions\nSpan 197 ft 10 in\nLength 193 ft 7 in\nHeight 54 ft 11 in \n\nEngines: RR Trent 772B\nTO Thrust Rating: 71,100 lb\n\nMax Fuel Cap.: 36,750 gal\nMaxTW: 509,039 lb\nZFW: 343,242 lb\n\nMax Range: 6,650 nm\nTypical Cruise Speed \n @ FL350: M.82
atc_type=AIRBUS
atc_model=A330
Category=airplane
[WEIGHT_AND_BALANCE]
reference_datum_position= 0.000, 0.000, 0.000
empty_weight_CG_position= 0.000, 0.000, 0.000
max_number_of_stations = 50
station_load.0 = "1360.0, 60.0, 0.0, 4.0, First Class (8 pax)" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 = "29240.0, 0.0, 0.0, 4.0, Tourist Class (172 pax)" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 = "3415.0, 40.0, 0.0, -3.0, Fwd Cargo Compt (3158 cu ft)" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 = "6710.0, 0.0, 0.0, -3.0, Aft Cargo Compt (2527 cu ft)" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.5 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.6 = "0.0, 0.0, 0.0, 0.0, FsStation"
empty_weight= 275458.000
max_gross_weight= 509039.000
// Moments of Inertia
empty_weight_roll_MOI= 8955743.000
empty_weight_pitch_MOI= 22600873.000
empty_weight_yaw_MOI= 22751035.000
empty_weight_coupled=0.000
empty_weight_coupled_MOI=0.000000
CG_forward_limit= 0.000
CG_aft_limit= 0.000
This is how I have the fspassengers payload:
(Even if I have a good CG it doesn't work in FS9!)
Can anyone help please?!