10-01-2017, 01:50 PM
Hi Guys,
First time poster here guys and firstly from a now old FSX user using FS Passengers and now using P3D, this product is the absolute shizz and nice job to Dan for running such a great product.
Now, I loaded up FS Passengers tonight in P3D for the first time and all went very smoothly. I set up my airline, all of the settings and decided on a Brisbane to Gold Coast flight to get things started. Problem was that on 4 attempts at taxiing which was going nice and smooth, I got half way down the apron and the damn plane detected a crash and crashed on me however that said, I was taxiing at a nice 30 knots admiring the view with not another airplane in sight and just BOOM! it detected a crash. Brisbane is my favourite airport and I need to know how I can fix this if possible as to me, it makes no sense to turn off the crash detection as where is the realism !
Now, when I checked the settings, yes, it was set to detect crash and damage but why would it detect a crash on me when there was nothing around and I was just taxiing along whistling dixie ?. I then turned the crash/damage detection off and twice, it did the same thing and I have Brisbane international airport loaded up which I bought from ORBX and I never had an issue with taxiing and detecting crashes before tonight even with the setting turned on to detect them. If anyone can provide any advice or assistance on this one it would be appreciated.
Secondly, for any P3D users, is there an auto-throttle function for your plane to taxi out as even with the throttle set back to 0 I use, it gradually speeds up bit by bit and I have been away from slight sims for just over 12 months until recently and am a little rusty and any help on this one is appreciated as well.
Lastly, when the FS Passengers mini-map comes up on my screen, it is very very small and hard to see and I wonder if there is a way to make it larger as I simply can't see the icons and needed to guess what was what and also in the settings screens, half of the screens (Right Side) are missing with a bar on the side that you can scroll down a page and the headings at the top of the page are also half cut off with what is underneath them and barely able to see what the headings are and Iwou,d love some help on this one to simply make the mini-map bigger and if someone could tell me how to do this it would be appreciated.
Cheers and good flying,
Chris...:-)
First time poster here guys and firstly from a now old FSX user using FS Passengers and now using P3D, this product is the absolute shizz and nice job to Dan for running such a great product.
Now, I loaded up FS Passengers tonight in P3D for the first time and all went very smoothly. I set up my airline, all of the settings and decided on a Brisbane to Gold Coast flight to get things started. Problem was that on 4 attempts at taxiing which was going nice and smooth, I got half way down the apron and the damn plane detected a crash and crashed on me however that said, I was taxiing at a nice 30 knots admiring the view with not another airplane in sight and just BOOM! it detected a crash. Brisbane is my favourite airport and I need to know how I can fix this if possible as to me, it makes no sense to turn off the crash detection as where is the realism !
Now, when I checked the settings, yes, it was set to detect crash and damage but why would it detect a crash on me when there was nothing around and I was just taxiing along whistling dixie ?. I then turned the crash/damage detection off and twice, it did the same thing and I have Brisbane international airport loaded up which I bought from ORBX and I never had an issue with taxiing and detecting crashes before tonight even with the setting turned on to detect them. If anyone can provide any advice or assistance on this one it would be appreciated.
Secondly, for any P3D users, is there an auto-throttle function for your plane to taxi out as even with the throttle set back to 0 I use, it gradually speeds up bit by bit and I have been away from slight sims for just over 12 months until recently and am a little rusty and any help on this one is appreciated as well.
Lastly, when the FS Passengers mini-map comes up on my screen, it is very very small and hard to see and I wonder if there is a way to make it larger as I simply can't see the icons and needed to guess what was what and also in the settings screens, half of the screens (Right Side) are missing with a bar on the side that you can scroll down a page and the headings at the top of the page are also half cut off with what is underneath them and barely able to see what the headings are and Iwou,d love some help on this one to simply make the mini-map bigger and if someone could tell me how to do this it would be appreciated.
Cheers and good flying,
Chris...:-)