30-10-2014, 10:30 PM
Did anyone of you by any chance make a payoadmodel of Alabeo`s Cessna C-207 ?
I tried it myself but get strange problems.
FSP doesn`t recognize my payloadmodell for the Cessna. I designed the model by studying the aircraftconfig and the payloadsettings ingame.
If I get it right, the plane has 7 seats, including pilote and copilote (or additional passenger) seat. Then it has a front cargo space between the
engine and the cockpit aswell as a little cargo space at the backend of the cabin. Is that correct?
Because neithertheless if my payloadmodel shows good weight/balance performance and was contributed to the aircraft config`s weight and coordinates,
FSP won`t recognize it. Even if I give the payloadmodel the very exact name of the model I use.
Instead it say, that there is an accuracy mismatch between the plane`s data and a payloadmodel matching to the name(namely my model I suppose).
More exactly it say, the number of seats doesn`t match and therefor the accuracy of the model is only 80%
The defeault payload it offers by itself says, the plane has actually 10 seats(!)...
Flying the plane with the default payloadmodel even if it`s only with 6 passengers always results in it being much overloaded (COG matter and the
baggage I guess)
Now, what imediatly catched my eyes, when I made the model, was that Alabeo set the defeault weight of the pilot and so with the passengers aswell to
190lbs instead of the normal 170 lbs. So might this heavier load per passenger corrupt the fsp data to let it think, it actually has more seats?
Or maybe it`s just me cuz http://www.fspassengers.com/forum/smileys/stupid.gif ^^
Anyone an idea, what I missed?
I tried it myself but get strange problems.
FSP doesn`t recognize my payloadmodell for the Cessna. I designed the model by studying the aircraftconfig and the payloadsettings ingame.
If I get it right, the plane has 7 seats, including pilote and copilote (or additional passenger) seat. Then it has a front cargo space between the
engine and the cockpit aswell as a little cargo space at the backend of the cabin. Is that correct?
Because neithertheless if my payloadmodel shows good weight/balance performance and was contributed to the aircraft config`s weight and coordinates,
FSP won`t recognize it. Even if I give the payloadmodel the very exact name of the model I use.
Instead it say, that there is an accuracy mismatch between the plane`s data and a payloadmodel matching to the name(namely my model I suppose).
More exactly it say, the number of seats doesn`t match and therefor the accuracy of the model is only 80%
The defeault payload it offers by itself says, the plane has actually 10 seats(!)...
Flying the plane with the default payloadmodel even if it`s only with 6 passengers always results in it being much overloaded (COG matter and the
baggage I guess)
Now, what imediatly catched my eyes, when I made the model, was that Alabeo set the defeault weight of the pilot and so with the passengers aswell to
190lbs instead of the normal 170 lbs. So might this heavier load per passenger corrupt the fsp data to let it think, it actually has more seats?
Or maybe it`s just me cuz http://www.fspassengers.com/forum/smileys/stupid.gif ^^
Anyone an idea, what I missed?