Fuel issue with some Aircrafts (FSPX)

[Unfaced]

Hi all,

please do not lough, but I think this one is serious.
When I load my Airplane (i.e. Wilco A32Series, Wilco 737 Classic, etc.) via the FSPX Boarding window, I select for example 12.000kg Fuel for Short
200nm trips, then FSPX loads the amount of Fuel in all fueltanks, that means 4000kg in left wing tank, 4000kg in Center tank and 4000 kg into the
right wing tank.

Although in reality there are used the Wingtanks first and then the Center Tanks, if necessary. So I would expect that FSPX loads first the wing tanks
full and then the other ones. Any ideas how to set this correctly?

best regards
Alex

[TrystanV]

you can actually select the fuel more precisely if you click on advanced fuel and then manually filling each tank, that works for me

[Unfaced]

Really? I never figured out that there is an advanced Button. Maybe I am blind or just lazy reading the manual -g- I will look after it on the
weekend. Thanks for that Information

[Cydon Prax]

By the way, in reality they use center tanks first then wing tanks; this to avoid problems upon landing where the tanks under the passengers, upon an
accident, ignite and kill people. Pilots would rather the wings ignite then the fuselage. It's also why in aircraft such as the Level-D763 the
centers tend to burn off first, and why most pictures on Airliners.Net show the Center tanks at 1,000 lbs or less.

[Unfaced]

I know this Fact, that's why I want to fill only the Wing tanks when doing short hops from A to B. When doing a long range, I do use the Center Tank
first.

[Unfaced]

btw I found the advanced Button and it worked fine for me - thank you