What the station values mean? - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers Customizing (http://www.fspassengers.com/forum/forumdisplay.php?fid=6) +--- Thread: What the station values mean? (/showthread.php?tid=9588) |
What the station values mean? - alan - 13-07-2005 Hi guys, Working on a payload model but having trouble on what to enter for the station values. Are they found in the CFG? Cheers Alan Re: What the station values mean? - SWAFO - 13-07-2005 No, you've go to get them from another source, and enter them manually. Or make them up so that the CG is good. Re: What the station values mean? - alan - 14-07-2005 Thanks SWAFO. Am I right in thinking the Z/Y values are....if you imagine a quadral line graph centred on the COG, each square being 1 foot? Z being the X/Horiz axis and Y being the vert axis? Hard to explain. Rough diagram below. For example, if the above was a C172 (0,0) COG (-2,2) Pilot in command (2,2) Co pilot (1,0) Left rear pax (-1,0) Right rear pax etc? Or have I misunderstood something? Cheers Alan Post Edited ( 07-14-05 02:00 ) |