+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: Concorde X Decent rate (/showthread.php?tid=8673)
Concorde X Decent rate - demon_x1 - 12-02-2011
Hi there, is there any way to change/remove the massive dent to satisfaction that decending to quickly gives? I've just bought Concorde X
and the aircraft was desgined to use decent rates of up to 11000 ft/min, although the flight plans usually end up arround the 7-8000 ft/min
its still too quick not to end up with the 'dive of death'
Re: Concorde X Decent rate - flappy - 06-08-2011
You can use notepad to change your vertical speed: when you have opened notepad, go to the aircraft.cfg in your aircrafts folder. Then you
go down to [autopilot], there you wil find default_vertical_speed=11000.000000
Change it to the rate you want and save it, it should work
Re: Concorde X Decent rate - gbapache - 06-08-2011
That only changes the default delta VS. All you have to do is when you change your altitude in the otto pilot just adiust your rate of change
to your own likeing. I think the dive of death is anything greater than 4000 ft/min. I could be wrong about that number and welcome
correction, and a beer.
