![]() |
Please, any way to undo last flight entry? =( - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5) +--- Thread: Please, any way to undo last flight entry? =( (/showthread.php?tid=7344) |
Please, any way to undo last flight entry? =( - Tunguja - 15-03-2008 Today I had the stupidest of the problems with FS9. Just got a brand new Beech 2900C for my most experienced pilot. Had gotten another one some days ago and tested it ok when doing a cargo flight, but this time I had gotten a passenger version. I started all the procedures, started my flight with FSP and made a pullback, then released the parking break and I didn't even increase the throttle, just let the engines begin to move the plane slowly so I could turn left and begin to taxi... when suddenly the plane bended /forward/ and crashed into the floor.... That happened SO fast that I couldn't be fast enough to kill FS9 so FSP database wouldn't be saved.. and all of the 14 passengers plus MY MOST experienced pilot were killed!!! I don't like to cheat. I've been using FSP for almost 3 years now and started off flying skyhawks with all my pilots. Now I have 8 of them... I killed 2 more, but I never complained (except to myself). I know I should make a backup of the db before every flight, but I don't... and please, there MUST be some way for me to undo last flight's comsequences (because it was not a flight, it was a FS9 failure with that aircraft that caused a stupid plane crash!) and go back to the last state... either that or just recover my most experienced pilot... If somebody has a way to do this, please tell me. Dan, please, hear my prayer! I really don't want to lose my whole career for a program's failure. I know it wasn't your program's, and I know this is just a game, but there must be some way to get into the database and just swipe this last flight and try to go back to what it was. Please, guys, help! Thank you! Re: Please, any way to undo last flight entry? =( - Tunguja - 15-03-2008 Okay, I know what happened: ASV6 had set the wind at 10000 kt >_> That's why as soon as I released the brake, the plane just flopped upsidedown and everybody died, I lost the plane I had just bought with almost all my capital and the company's reputation went down to 76% from 94% I found the 'resurrection' program, but I'd still really like to go back to the place I was, before I started that flight. It's just a matter of seeing the previous report and see what the old reputation was, and to just delete that 'flight' into an impossible tornado :P Thanks again for your help! Re: Please, any way to undo last flight entry? =( - poden - 17-03-2008 Bummer. Good thing you figured it out quickly though. Re: Please, any way to undo last flight entry? =( - Tunguja - 18-03-2008 Er, yeah, I figured it out, but I still need somebody's help so I can 'go back' to the previous state ^^; Re: Please, any way to undo last flight entry? =( - poden - 18-03-2008 You can't unless you backed up the database before the flight. If you're using "autorecord", you should probably consider starting with a new company. A lot of problems with the software, (like the one you experienced) are automatically recorded; your only recourse then is to use a backup database (which you have to redo every flight). Post Edited ( 03-18-08 21:43 ) Re: Please, any way to undo last flight entry? =( - the_nick - 18-03-2008 here is something for your pilot (that this is still not mentioned) http://www.fspassengers.com/?action=download&files=421_Resurect.zip Re: Please, any way to undo last flight entry? =( - Tunguja - 19-03-2008 In my post I already said that I knew about resurect and that I should have backed up my db. This is just a cry for help. If somebody can lend me a hand with this problem, then I'll be forever grateful. Re: Please, any way to undo last flight entry? =( - the_nick - 19-03-2008 I'm sorry for not seeing this , then I can only say , you are screwed !!! |