![]() |
problem or not? - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5) +--- Thread: problem or not? (/showthread.php?tid=7343) |
problem or not? - homer09001 - 14-03-2008 im currently mid way from OMDB to VOBG Dubai Banglore, in the CLS A330-300, currently my display is showing different readings for the 2 engines: VIB N1: Eng #1 - 0.9 Eng #2 - 1.6 PSI: Eng #1 - 264 Eng #2 - 272 NAC °C Eng #1 - 290 Eng #2 - 294 As im flying with FSPax, i wanted to make sure it is deffinatly an engine problem before i declare and emergencys, im not noticing any other problems with the engines, and these values are currently holding at them values with a constant throttle setting, so it doesnt seem to be getting any worse? Re: problem or not? - Dutch64 - 14-03-2008 looks fine to me but I guess by now you must have landed or crashed already ![]() Re: problem or not? - homer09001 - 14-03-2008 nah landed very nicely lol thanks: smooth landing happy pax, and a nice $5m income for the flight http://www.fspassengers.com/?action=va&listflight=173962 Re: problem or not? - Joeflyer - 14-03-2008 Congrats! Another success story. I'm sure copious amounts of beer awaited your arrival ![]() Re: problem or not? - Ali310 - 14-03-2008 Quote:Joeflyer wrote: duh. I was there handing it out ![]() Re: problem or not? - homer09001 - 14-03-2008 have to admit though the 3 1/2 hour flight almost went down the pan when i landed as there was an NDB half on the runway so i had to swerve around it somewhat. |