+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: Resetting failures in flight (/showthread.php?tid=7076)
Resetting failures in flight - philbrown - 17-07-2007
Is it possible to cancel or reset failures in flight?
I thought I had all the failures disabled, but the dangerous area database was still active, and I got shot flying over the Houses of
Parliament in London, leading to an electrical failure which meant unable to lower the gear, and I was unable to clear the tick mark from
the FS failures box (it kept on reappearing when you reloaded the failures box).
To say I was a little annoyed after a 9 hour flight from Vancouver would be an understatement.
And since when are aircraft liable to shooting when flying over London???
Re: Resetting failures in flight - DBE - 17-07-2007
Hi Phil,
Unfortunately you cannot reset (or cancel) failures in flight.
And as far as the London "war zone" is concerned, you'll find quite a couple of threads if you search a bit....
Re: Resetting failures in flight - Veganist - 17-07-2007
It's all in the /FS2004/FsPassengers/config/dangerous.cfg.
You can best uncomment all entrys (by putting // in front of each line, use a simple text editor like notepad to do this) so you can reactivate them
later if you want to.
More info is given in the /FS2004/FsPassengers/Bin/dangerous_area.rtf.