![]() |
Wrong authorization ? - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5) +--- Thread: Wrong authorization ? (/showthread.php?tid=6400) |
Wrong authorization ? - LaFe - 28-06-2006 Hi, I've been using for almost a year (bought it on 20050713), and I have received authorization errors for the past week. When I start FS2004, the FSPassengers menu look normal, I can create flights, manage the company etc. But after a while I receive a "wrong authorization, buy FSP" message (or something similar). The FSP menu then dissapears from FS2004. The only thing I've done recently is migrating to a larger HD. Drive letters are the same, though. I always use the same flight on FS2004 startup, fly to a location and save the flight on exit. I've tested different aircraft but I'm currently trying to take off from LFRM (Le Mans, France) , haven't tried other locations yet, will do that tonight. Any clues ? regards, Lars Re: Wrong authorization ? - Drew - 28-06-2006 so have you just moved all of your files to a different harddrive? if so, intall FsP again (no need to uninstall, it wont overwrite your database, (you may wish to back up your sound/payload folders if you have added to them) and then unlock FsP again with your original code, then you should be good to go ![]() reason........ http://fspassengers.com/?action=faq&question=19 Quote:DID YOU COPY/MOVE THE FSPASSENGER FOLDER? Re: Wrong authorization ? - LaFe - 28-06-2006 I started a new flight from Hamburg to Cologne and it went OK without reinstallation, but if I experience problems again I will reinstall FSP as advised. best regards /Lars Re: Wrong authorization ? - Joshuah A. Wetzel - 24-07-2006 The same thing is happening to me! I would start a new flight and about 10-15 minutes after I start it, it tells me "Wrong authorization. Aborting flight." This has happened every time I start a flight lately. I haven't moved or modified ANY files. I have reinstalled the program 3 or 4 times. Someone please help! Re: Wrong authorization ? - Maurice Lyon - 27-07-2006 I Tried to fly in demo mode, as I cant put in my unlock code, it came up when I was taxiing to the runway and told me to buy FSP, how many times must you buy it before it works?......... Re: Wrong authorization ? - Dutch64 - 27-07-2006 Maurice, I noticed your problem in several posts, I think you should best contact Dan (see bottom of page for contact button) and explain him in detail what has happened, what you've been trying so far etc. Re: Wrong authorization ? - Maurice Lyon - 27-07-2006 Hi Dutch, I know I have put it in several posts because it is getting rather frustrating considering I got payware. I have tried reinstalling it several times but no success, Dan is in contact with me but it is getting the better of me.......... Re: Wrong authorization ? - DanSteph - 27-07-2006 Maurice I just sent you a detailled mail, for "wrong authorisation" drew posted the right link here: http://fspassengers.com/?action=faq&question=19 Best regards Dan Re: Wrong authorization ? - leboyrio - 28-07-2006 Hi i have had the same problem i reinstalled the fs passengers did the upgrade etc... and still i get the same message! wrong authorization code please buy FSP when i uninstalled fsp i did not save the data base is that is the reason? Re: Wrong authorization ? - Dutch64 - 28-07-2006 It's not the reason, if you do a complete fresh install of fsp it should be fine after you entered your name and code again. Just don't move it to another dir or disk after installing. Re: Wrong authorization ? - Bullitsec - 28-09-2006 Hello, when i unlock the demo with the username and the passoword in the box i receive a message: "Wrong username or password" Please help me BullitSEC Re: Wrong authorization ? - Joshuah A. Wetzel - 28-09-2006 Do you copy and paste or type the user name and password manually? If you type it manually, have you tried copying and pasting your user name and password? Re: Wrong authorization ? - Ceemosp - 28-09-2006 Happened on my first installation attempt after new FS9 installation. I uninstalled it (YES, I did have backup copies of the datafiles) DELETED the fsp folder and re-installed after reboot and all went fine apart from my little incidents problem ![]() Re: Wrong authorization ? - Dutch64 - 28-09-2006 Quote:Bullitsec wrote: Maybe your code looks like this: XXXX-XXXX-XXXX. If so than try XXXX_XXXX_XXXX (with underscores) Re: Wrong authorization ? - Bullitsec - 28-09-2006 Thank you Dutch64 |