+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: Baro pressure changing at FL350? (/showthread.php?tid=5710)
Baro pressure changing at FL350? - Flagstaff Flyer - 11-12-2005
Wondering if this is a FS2004 problem. I noticed at cruise altitude with altimeter set to 29.92 that the pressure below 18k must be
effecting the altimeter because it will jump up and down a few hunded feet causing the autopilot to compensate. Also, you would think
that at that altitude the altimeter should match the elevation FS thinks you are at (Shift-Z). It can be off 500 feet!
Default 737
Re: Baro pressure changing at FL350? - Dutch64 - 11-12-2005
The altimeter settings in fs are buggy but another reason might be that you have VAS enabled in ASV (If you have ASV
)Re: Baro pressure changing at FL350? - SWAFO - 11-12-2005
This, and it's relation to ATC was discussed a few days ago. A search would be helpful!