+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: FLAPS SET??? (/showthread.php?tid=5554)
FLAPS SET??? - brbirtch - 03-11-2005
i enjoy flyin the boeing 737, i no that flaps to be set a 5 for takeoff however, fspassenger see flaps at 5 to be wrong, is this a glitch?
Re: FLAPS SET??? - DanSteph - 04-11-2005
5 is just fine, yre you sure they were set ?
take care if you taxy more than 30kts FsP consider you are taking off
and penalise if they are not set.
Dan
Re: FLAPS SET??? - pagir - 04-11-2005
And don't retract them before 500 ft AGL!!!
Pagir
Re: FLAPS SET??? - United844 - 06-11-2005
when i fly the 737 in FSP i set them to 5 degrees flaps for take off and nothing happends on mine yoyu might off not had them set??
Re: FLAPS SET??? - andy14 - 06-11-2005
Quote:United844 wrote:
when i fly the 737 in FSP i set them to 5 degrees flaps for take off and nothing happends on mine you might off not had them set??
same my flaps are set at 5
Re: FLAPS SET??? - Jetflyer - 06-11-2005
On my A300 it is normal to do a slats only takeoff without trailing edge flaps. I get penalised for this. Why?
Re: FLAPS SET??? - SWAFO - 06-11-2005
Keep in mind that most flap issues are due to retracting them below 500FT AGL (like Pagir mentioned). Keep in mind that in the 737
we'll start the initial flap retraction at around 1000' AGL. After this, we'll retract the flaps on schedule until they are up. For example, if
you're performing a flaps 5 takeoff, set flaps 1 at 1000', then flaps up at 190KIAS. This is a good, basic rule of thumb.
Let me know if you have any other questions. I'm happy to help!