+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers General (http://www.fspassengers.com/forum/forumdisplay.php?fid=4)
+--- Thread: Lear Jet Lights FSX (/showthread.php?tid=3998)
Lear Jet Lights FSX - bolz3r - 22-01-2011
Hello,
I have a problem to figure out which lights I need to activate in the Lear Jet.
FSP want me to have:
Nav Lights
Beacon Lights
Strobes
Taxi Lights
Landing Lights
I have;
Nav Lights
BCN/Strobe
Recog
L/R Landing/Taxi
When should I activate which light I have in the Lear Jet, to satisfy FSP with full light penalty on?
Another basic question:
When should I activate the Seat Belt lights to satisfy FSP?
Thanks in advance
Re: Lear Jet Lights FSX - whiskey-zulu - 22-01-2011
Seatbelts should be on all the time when on the ground, except during re-fueling; PIC's discretion in the air.
Lights wise, you'll have to play around with the settings. I haven't flown the default LearJet for some time, but as a rule, beacon should be on when
the APU and/ or engines are running, as should NAV lights; strobes and landing lights go on when entering the runway after T/O clearance and off when
exiting a runway after landing; landing lights should also be off at 10K feet. Taxi lights on on the ground, off at wheels up.
Re: Lear Jet Lights FSX - bolz3r - 22-01-2011
Thanks for the prompt reply!
The problem is, I don´t know what the RECOG light is. Is it compareble to the STROBE on other planes? If I turn it on, nothing happens. Another point
is the combined Taxi/Landing lights. Should I turn them on while taxi, even if the landing lights are on too then?
Please check the link below for better understanding. Thanks a lot!!!
http://www.youtube.com/watch?v=LycuubENrgo
Re: Lear Jet Lights FSX - Joeflyer - 22-01-2011
Recognition lights = nav lights. I'm sure you have a switch or button for nav lights?
Re: Lear Jet Lights FSX - bolz3r - 22-01-2011
Quote:Joeflyer wrote:
Recognition lights = nav lights. I'm sure you have a switch or button for nav lights?
Yes I have the Nav Light Button, but I also have another button called RECOG, which makes nothing. FSPassenger gave me a penalty for not turning on the strobe light when enter runway. I turned on the BCN/STROBE light right before starting the
engines in Frankfurt and turned it off right after cutoff the engines in Munich. I did that because of the BCN shortcut. I think this means beacon.
Unfortunally it seems like the Strobe light is also on then
In the end it is that I have:
BCN/STROBE = beacon and strobe light together at one switch
NAV = navigation lights
RECOG = this switch doesn´t work
L LDG = all taxi and landing lights together at one switch
R LDG = this switch doesn´t work
How can I use this configuration without getting a light penalty by FSP? Plz help
or how can I make the lights work?
Post Edited ( 01-22-11 16:15 )