+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers General (http://www.fspassengers.com/forum/forumdisplay.php?fid=4)
+--- Thread: Disabling the Abort When changing posistion (/showthread.php?tid=2148)
Disabling the Abort When changing posistion - mack519 - 27-06-2006
Is there a way to disable it? because im not a person to do long flights, i do LA to Las vegas, but even then i dont have time to do the whole thing.
So back to my quesion, can i disable it?
Re: Disabling the Abort When changing posistion - poden - 28-06-2006
No, FSP doesn't let you slew. However, you can use time compression; I often use time compression because my simming time is pretty limited too.
There's a 30% point penalty for using time compression, but that can be disabled.
Re: Disabling the Abort When changing posistion - Vokial - 28-06-2006
Yes, you should use time compression... flying from L.A. to Las Vegas with time compression (maybe 8x or even 16x) will take you only a few minutes.
Be sure to disable ATC if you fly IFR, though, because you might miss the correct timing to answer to ATC and you might get your IFR cancelled while
flying...
Re: Disabling the Abort When changing posistion - mack519 - 28-06-2006
how do i do that? time compression
Re: Disabling the Abort When changing posistion - ivo - 28-06-2006
press 'r' and '+' or '-' . This will simulate that time is going faster or slower. if you go to 2x, then one second in real life would equal to 2 in
the sim. if you go to 8x, then one second would equal 8.
Re: Disabling the Abort When changing posistion - jetBlue220 - 28-06-2006
Or just go to Options on the top toolbar thing, and go to the option for increasing or decreasing it.