FsPassengers Forums
Alabeo Diamond DA42 pressure altitude - Printable Version

+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: Alabeo Diamond DA42 pressure altitude (/showthread.php?tid=17666)



Alabeo Diamond DA42 pressure altitude - Bear95 - 06-04-2016

Hello I use the Alabeo Diamond DA42, and I also fly this aircraft in the real world. Now in the real aircraft we have the oxygen. How can I fix this issue in the alabeo so fspassenger doesn't give me danger pressure altitude?
Thank you


RE: Alabeo Diamond DA42 pressure altitude - Joeflyer - 06-04-2016

Open the payload editor, which is in the payload model folder of the main FsP folder, and select the payload model you use for the Diamond. If the box is checked "This aircraft isn't pressurized", uncheck it and save the .ini file. You should be good to go at this point.


RE: Alabeo Diamond DA42 pressure altitude - Bear95 - 09-04-2016

I tried but it continuous to say pressure level danger.


RE: Alabeo Diamond DA42 pressure altitude - SamTDS - 09-04-2016

(09-04-2016, 10:44 PM)Bear95 Wrote: I tried but it continuous to say pressure level danger.

When you go to load your aircraft go into the flight ID an settings tab where you can fource it for that aircraft. ~sam


RE: Alabeo Diamond DA42 pressure altitude - Bear95 - 11-04-2016

I tried also that but nothing


RE: Alabeo Diamond DA42 pressure altitude - Joeflyer - 11-04-2016

Are you sure you are saving the .ini file after making sure the box is unticked for "this aircraft isn't pressurized" And, are you sure you are forcing this same payload model?
There are 2 different payload models in the more downloads section...one in the search for "Diamond" and the other "DA42". Have you tried both by using the method I described?


RE: Alabeo Diamond DA42 pressure altitude - SilverGoose - 14-04-2016

(06-04-2016, 04:54 PM)Bear95 Wrote: Hello I use the Alabeo Diamond DA42, and I also fly this aircraft in the real world. Now in the real aircraft we have the oxygen. How can I fix this issue in the alabeo so fspassenger doesn't give me danger pressure altitude?
Thank you

Unrelated question here, how long does the oxygen that the DA42 carries last?