![]() |
[outdated] FsPassengersP3D for Prepar 3.2 available here only: - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers General (http://www.fspassengers.com/forum/forumdisplay.php?fid=4) +--- Thread: [outdated] FsPassengersP3D for Prepar 3.2 available here only: (/showthread.php?tid=17628) |
[outdated] FsPassengersP3D for Prepar 3.2 available here only: - DanSteph - 13-03-2016 EDIT: The new version that support Prepar3D 3.2 is now officially online, see download page FsPassengersP3D for Prepar 3.2 available here only Before updating all the download/update pages it would be cool if you can test and let me know if all is okay for you Code: Release 20160313 (13 march 2016) Download here: http://www.fspassengers.com/download/FsPassengersP3D_Setup_20160313.exe (122mb) Thanks for any feedback ![]() RE: FsPassengersP3D for Prepar 3.2 available here only: - sturag - 13-03-2016 Installed it successfully and started on a fresh complete install of P3D 3.2.3.16769. Activation also working, will try to restore my old company as for now.. If i run into any troubble i let you know. Thanks Dan! /Peter RE: FsPassengersP3D for Prepar 3.2 available here only: - sturag - 13-03-2016 OK! Imported my previous company = check, working good! Did a short flight with FsPassengersĀ = All working as expected! At least for me ![]() Thank you Dan for a great job, and for the best flight simulation addon there is!! Let me know if you like me to test anything else! /Peter RE: FsPassengersP3D for Prepar 3.2 available here only: - Motormike - 13-03-2016 All working as expected. No crash or failure now after 4 short Flights. Old Database also imported. Thank you regards Mike RE: FsPassengersP3D for Prepar 3.2 available here only: - gfl1973 - 13-03-2016 Short flight with A320 and all is ok, thanks for your efforts Dan. RE: FsPassengersP3D for Prepar 3.2 available here only: - Stardrifter - 13-03-2016 I am still getting the error when launching the installer that my version is outdated. Am I going about the update process wrong? Just launching the executable after downloading gives me the error. I have the newest client and content from LM (3.2.3.16769) EDIT: I went ahead and fully uninstalled the old version of FSP (I had only just started my company so I wasn't worried about losing anything) and I'm still getting the error with the new (and old) installers for FSP. Won't let me install. Thanks in advance to anyone who might be able to help! EDIT 2: I'm starting to suspect I accidentally reinstalled the old rather than the newest 3.2 client. I am installing the client again just downloaded fresh, will see if that fixes it! EDIT3: I am not a smart man. That was it. Working great now! RE: FsPassengersP3D for Prepar 3.2 available here only: - DanSteph - 13-03-2016 Free thanks for everyone's profile here.... ![]() Much thanks for you feedback again. The new version dated from 14 march is now officially online. RE: [outdated] FsPassengersP3D for Prepar 3.2 available here only: - mvgix - 14-03-2016 Updated 2 times in 2 days and all is working very well! Did make a backup before but did not have to use it, all data is copied to the new version. Loving your work Dan! RE: [outdated] FsPassengersP3D for Prepar 3.2 available here only: - Joeflyer - 14-03-2016 Ditto here. Update went well and copied over the saved database. No issues thus far ![]() |