+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: Flight Simulators (http://www.fspassengers.com/forum/forumdisplay.php?fid=7)
+--- Forum: FS2004 General (http://www.fspassengers.com/forum/forumdisplay.php?fid=10)
+--- Thread: Again AND Again UPDATE 6/9/06 (/showthread.php?tid=13522)
Again AND Again UPDATE 6/9/06 - samiranks - 07-06-2006
okay guys this is from the "its getting annoying thread" SORRY JAYKAE (I know i told you, you didnt have to open the thread) Anyway i got
the error message using the skypanel on a 737-300 boeing aircraft from posky, flying out of KMDW using addon payware flytampa
Midway. This happens when im doing a spot view and i pan around to view other aircrafts. this is the error message i get after the crash
C:\Documents and Settings\administrator\Application Data\Microsoft\FS9\fs9.CFG.txt
C:\Documents and Settings\administrator\Application Data\Microsoft\FS9\dxdiag.xml
C:\Documents and Settings\administrator\Application Data\Microsoft\FS9\scenery.cfg
can anyone tell me what could be the problem? I will be glad to send a copy of my fs9.cfg for you guys to look over for me....
Well ive uninstalled my fs9.cfg and reinstalled it, because before i did that, everytime i start a flight at ATL i get a CTD; however after reinstalling the fs9.cfg i could have load a flight starting at ATL Im wondering if it was because i had under OLDMODULES GAUGESOUND.DLL and like you guys said in another post that I needed to take out the gaugesound out of the modules folder in flightsimulator folder. So i dont know if that was the problem, but i will find out. Wouldnt I?
Post Edited ( 06-09-06 20:12 )
Re: Again AND Again - JayKae - 07-06-2006
Don't be sorry, I did not close the other thread actually lol anyway, doesn't matter ... but this error does it happen in the same area with a
default plane as well or is it only your 733/skypanel ?
Re: Again AND Again - Sovek - 07-06-2006
sounds like its scenery problem.
Re: Again AND Again - samiranks - 07-06-2006
i dont think its a scenery problem because ive installed and uninstalled over and over and from my previous thread i only have those
paywares
Re: Again AND Again - JayKae - 08-06-2006
The dxdiag.xml is what gets to me. Have you tried making a backup of your fs9.cfg by renaming it and saving it somewhere safe and
letting FS9 build a new cfg?
Re: Again AND Again - samiranks - 08-06-2006
deleted to shorted thread
Post Edited ( 06-13-06 19:53 )
Re: Again AND Again - samiranks - 08-06-2006
Quote:JayKae wrote:isnt the dxdiag.xml have something to do with my direct x? also as far as rebuilding my fs9.cfg, i will try that again and see what happens
The dxdiag.xml is what gets to me. Have you tried making a backup of your fs9.cfg by renaming it and saving it somewhere safe and
letting FS9 build a new cfg?
Re: Again AND Again - JayKae - 08-06-2006
That config looks alright apart from Area 424 which should have a line saying Layer=248 also make sure your
scenery/landclass/meshes are in the right order per scenery. Let us know how you go with the fs9.cfg compile
Re: Again AND Again - samiranks - 08-06-2006
i also noticed that my layers doesnt match my area numbers. does it make a difference? could that be any problems or issue?
Re: Again AND Again UPDATE 6/9/06 - samiranks - 12-06-2006
okay i dont know what the problem is. I uninstall flightsim all the way and reinstall everything again. was doing a flight from lfpg to katl and
fs crash again. the only thing ive downloaded from that area is german scenery 2.3 france 2, flightcorse and flightcorse autogen and
basepack, monaco, gibraltar. I dont know whats going on. I dont have any gauge addons except for the 757 for chris Jeanne and 767
which only includes the gaugesound.dll Now is the gaugesound.dll suppose to be in the system32 as well as the root for fs9? could it be
my activesky causing the overnight crash? also i tried disabiling the norton antivirus.. I just dont know. I guess i will be giving up flying
until new flightsim comes out if it continues to do this...
Re: Again AND Again UPDATE 6/9/06 - JayKae - 12-06-2006
Can you post the error logs please ?? ( go to your START button, click Help & Support, in the screen that follows click Support, then in the
left bottom you will see 4 options click on "Advanced System Information", then in the right of your screen click on "View Error Log" )
Re: Again AND Again UPDATE 6/9/06 - samiranks - 13-06-2006
Tuesday, May 16, 2006 MsiInstall er Product: ActiveSky Version 6 and ActiveSky Graphics -- Error 1706.No valid source could be
found for product ActiveSky Version 6 and ActiveSky Graphics. The Windows Installer cannot continue.
Tuesday, May 16, 2006 MsiInstall er Product: ActiveSky Version 6 and ActiveSky Graphics -- Error 1706.No valid source could be
found for product ActiveSky Version 6 and ActiveSky Graphics. The Windows Installer cannot continue. Tuesday, May 16, 2006
MsiInstall er Product: ASV Enhanced - ActiveSky Version 5 -- Error 1500.Another installation is in progress. You must complete
that installation before continuing this one. Tuesday, May 16, 2006 MsiInstall er Product: ActiveSky Version 6 and ActiveSky
Graphics -- Error 1706.No valid source could be found for product ActiveSky Version 6 and ActiveSky Graphics. The Windows Installer
cannot continue. Tuesday, May 16, 2006 Applicatio n Error Windows cannot access the file E:\STUB.EXE for one of the
following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on
this computer; or the disk is missing. Windows closed the program STUB.EXE because of this error. Program: STUB.EXE File:
E:\STUB.EXE The error value is listed in the Additional Data section. User Action 1. Open the file again. This situation might be a
temporary problem that corrects itself when the program runs again. 2. If the file still cannot be accessed and - It is on the network, your
network administrator should verify that there is not a problem with the network and that the server can be contacted. - It is on a
removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer. 3. Check and repair the file
system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type
CHKDSK /F, and then press ENTER. 4. If the problem persists, restore the file from a backup copy. 5. Determine whether other files on
the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware
vendor for further assistance. Additional Data Error value: C000009C Disk type: 5 Tuesday, May 16, 2006 Applicatio n Error
Faulting application STUB.EXE, version 0.0.0.0, faulting module STUB.EXE, version 0.0.0.0, fault address 0x00001010.
Tuesday, May 16, 2006 Applicatio n Error Fault bucket 00501893.
Tuesday, May 16, 2006 DrWatson The application, E:\stub.exe, generated an application error The error occurred on 05/16/2006 @
15:19:16.000 The exception generated was c0000006 at address 00401010 (stub) Tuesday, May 16, 2006 MsiInstall er Product:
ASV Enhanced - ActiveSky Version 5 -- Error 1706.No valid source could be found for product ASV Enhanced - ActiveSky Version 5.
The Windows Installer cannot continue. Wednesday, May 17, 2006 Applicatio n Hang Hanging application IKernel.exe, version
6.31.100.1221, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
Wednesday, May 17, 2006 Applicatio n Hang Hanging application IKernel.exe, version 6.31.100.1221, hang module hungapp,
version 0.0.0.0, hang address 0x00000000.
Wednesday, May 17, 2006 Applicatio n Hang Hanging application IKernel.exe, version 6.31.100.1221, hang module hungapp, version
0.0.0.0, hang address 0x00000000.
Hanging application FS9.EXE, version 9.1.0.40901, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
Product: ASV/AE 512x512 Cloud Texture Resolution Set (Part 1 of 3) -- ASV Must be installed to run this setup!
Hanging application FS9.EXE, version 9.1.0.40901, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
Monday, June 12, 2006 Microsoft Flight Simulator 9.0 None
these are the messages JayKae. Well some of them. I guess it may have something to do with the Activesky also, because i didnt install any of the 512 clouds due to using the fsenvironment. could that be the reason? Also i have the 4cd from fs9 in the burn drive, maybe i need to put it in the cdrom to have it working properly? or could it be due to the 4cd for fs9 could be damaged? Still trying to solve this problem guys....
Post Edited ( 06-13-06 19:00 )
Re: Again AND Again UPDATE 6/9/06 - aristoteles - 13-06-2006
Did you try to reinstall ASV6? Are you using AutoSubmit ( Options/Graphics ) in ASV?
Re: Again AND Again UPDATE 6/9/06 - samiranks - 13-06-2006
do i need to browse to any of the theme when i hit auto submit? also do you think its more so likely the activesky causing the issue. I wonder if fscopilot had anything to do with it? oh well i didnt see that in the error text so maybe not
Post Edited ( 06-13-06 19:54 )
Re: Again AND Again UPDATE 6/9/06 - aristoteles - 13-06-2006
I think so
