+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: Flight Simulators (http://www.fspassengers.com/forum/forumdisplay.php?fid=7)
+--- Forum: FS2004 General (http://www.fspassengers.com/forum/forumdisplay.php?fid=10)
+--- Thread: FSD Avanti (/showthread.php?tid=13518)
FSD Avanti - Tolwyn - 07-06-2006
Um. I'm really confused by the pressurization system.
I've "purchased" this aircraft for my company, but I'm killing my passengers due to depressurization sickness.
I am pretty adept at this sim, but can't, for the life of me...
1. Figure out how to create an accurate loadout *.ini; regardless of help files, tutorials... and...
2. Get this aircraft to behave from the pressurization perspective.
Any help??
Re: FSD Avanti - poden - 07-06-2006
2) On the payload model, just make sure the "this aircraft isn't pressurized" IS NOT checked.
1) Presumably you're having problems with the CG?
When all else fails in your payload model, you can just place everything at the CG (I don't, but I've seen a lot of models that do). The locations are
just 0.0, 0.0, unless the Avanti's CG isn't at 0,0. If it isn't, just put the seats at the same position as the CG.
Because the Avanti only has a "mathematical chord", it may be that the cg computation is a little strange, so just placing all the seats at the CG
might help.
Otherwise, someone posted this Avanti payload model quite some time back. I don't know anything about it, but you could possible use it as a starting
point:
http://www.fspassengers.com/?action=download&cat=All&sort=Date&page=0&search=Avanti&searchtype=Title&download=submit
Remember to search for payload models on the "More Downloads" page.
Best of luck!
Re: FSD Avanti - jboweruk - 07-06-2006
pretty sure that's the one I use that works.