FsPassengers Forums
Aerosoft Twin Otter Payload Problem - Printable Version

+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Customizing (http://www.fspassengers.com/forum/forumdisplay.php?fid=6)
+--- Thread: Aerosoft Twin Otter Payload Problem (/showthread.php?tid=10786)



Aerosoft Twin Otter Payload Problem - aristoteles - 05-05-2015

I have been trying to make a payload work (downloaded from the More Downloads section) for the Aerosoft Twin Otter Extended. FsP doesn´t recognize any valid
payloads, even after changing the .ini file name to dsevral possibilities. Any ideas? Anyone using this fantastic aircraft with FsP?


Re: Aerosoft Twin Otter Payload Problem - Joeflyer - 06-05-2015

Welcome back Aris! I have to go back and look at which payload model I use for this aircraft. Will do that when I go home for lunch and report back to
you. I do know that I never had an issue with it, as I forced a particular payload model within the FsP settings.

Also, Aris, I will move this thread over to the Customizing forum after you have responded. Sound good?



Post Edited ( 05-06-15 15:43 )


Re: Aerosoft Twin Otter Payload Problem - aristoteles - 06-05-2015

Thanks Joe, move the thread wherever it belongs and sorry for the incovenience , of course.


Re: Aerosoft Twin Otter Payload Problem - Joeflyer - 06-05-2015

No inconvenience at all, sir! As a matter of fact, I did not get a chance to run home during lunch today and will have to take a look at the payload
model I use later this evening. Will certainly do that tonight!

Edit: I use 2 different payload models that I got from the More Downloads section. Forgive me but I don't have the specific file names but I can share the .ini names:

Twin Otter.ini
TwinOtter_BritishAir_Press.ini

I did uncheck the "this aircraft isn't pressurized" box on both because I do like to put the Otter in the 14-16,000 ft. levels. At any rate, you should not have a single issue using these with FsPX. You can force either payload model when you start the process of loading the aircraft.....under aircraft options in FsPX. I did not have to fiddle with the .ini names to get them to work. Frankly, I haven't had to do this on any payload model since the FS9 days. Let me know if you find them in the More Downloads section and have tried either one.



Post Edited ( 05-07-15 00:54 )


Re: Aerosoft Twin Otter Payload Problem - aristoteles - 07-05-2015

Thanks Joe. Time for a Twin Otter flight from Bella Coola to Ketchikan. Wink


Re: Aerosoft Twin Otter Payload Problem - Joeflyer - 07-05-2015

Did you get a payload model to work?




Re: Aerosoft Twin Otter Payload Problem - aristoteles - 08-05-2015

I forced a particular payload model within FsP settings eventually, and of course, it worked.


Re: Aerosoft Twin Otter Payload Problem - Joeflyer - 08-05-2015

Awesome! Applause