FsPassengers Forums
LTAC-VECC - Printable Version

+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers General (http://www.fspassengers.com/forum/forumdisplay.php?fid=4)
+--- Thread: LTAC-VECC (/showthread.php?tid=2317)

Pages: 1 2


Re: LTAC-VECC - Joeflyer - 11-09-2006

Uncheck lens flare...that one takes up more resources,too. Are you happy with the other settings? As for myself, I have MIP Map and
Hardware Render Lights at 7 and everything else is set to almost max. with the exception of cloud draw. I have that set to the lowest. Your
frame rates are locked at the same setting I have mine.

Now, were you able to set the AA and AF in your graphics card control panel??




Re: LTAC-VECC - the_nick - 11-09-2006

could you explain with a pic where I can see the FA an AA , because for this kind of stuff I'm to dumb lol




Re: LTAC-VECC - Joeflyer - 11-09-2006

I can't from this laptop. I'm away from home this week, so I won't be able to send you a screenie of what it looks like. Just go into your
control panel on your pc...there should be a Nvidia control panel there. Open it and you will find both AA and AF there. Wish I could be of
more help.




Re: LTAC-VECC - the_nick - 11-09-2006

that's no problem you were a great help already take a look at this :

[Image: goodjobJF.jpg]

[Image: goodjobJF-1.jpg]

it looks much better now , and my screen doesn't shake anymore during take-off
thanks a lot



Post Edited ( 09-11-06 21:08 )


Re: LTAC-VECC - Joeflyer - 11-09-2006

Mucho better...wooohoo!Top Happy to helpSmile After all, many kind people here have extended a helping hand when I've needed it...and that
was quite often! Anyway, happy flying!




Re: LTAC-VECC - the_nick - 11-09-2006

but when you can help me maybe more would you give it a ring plz Smile thx already




Re: LTAC-VECC - Dutch64 - 11-09-2006

Nick, you should disable "toepassing gestuurd" for interferentieinstellingen (AA) and anisotropisch filteren (AF). Then use values like 4x for it as a
start. (Maybe you figured it out by now already, just noticed the post Wink )




Re: LTAC-VECC - the_nick - 11-09-2006

Quote:Dutch64 wrote:
Nick, you should disable "toepassing gestuurd" for interferentieinstellingen (AA) and anisotropisch filteren (AF). Then use
values like 4x for it as a
start. (Maybe you figured it out by now already, just noticed the post Wink )
ok thx dutch64 I'm going to try it out now



Post Edited ( 09-11-06 21:25 )


Re: LTAC-VECC - the_nick - 11-09-2006

dutch what is the effect of this change ?




Re: LTAC-VECC - the_nick - 11-09-2006

I have this now , do I have to change more things ?
[Image: 6.jpg]
or does it has to be like this ???
[Image: 7.jpg]



Post Edited ( 09-11-06 21:34 )


Re: LTAC-VECC - Dutch64 - 11-09-2006

Yes, and within fs9 make sure the AntiAliasing is off. Sometimes, the effect is only visible after a reboot




Re: LTAC-VECC - the_nick - 12-09-2006

ok thx for the really good support Top




Re: LTAC-VECC - Joeflyer - 12-09-2006

Happy to know everything is working out for you,Nick. Doesn't it make you feel good when a plan comes together?Smile




Re: LTAC-VECC - the_nick - 12-09-2006

yes it does Smile now it's finaly finished with those ugly headbanging Wall graphics Smile Top
this is now the result of the latest thing I (we) did on the settings
[Image: latest.jpg]



Post Edited ( 09-12-06 20:03 )